RT0805FRE0759KL Equivalent & Substitute Parts

Part Overview

The RT0805FRE0759KL is a 59 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface-mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is currently active in production and ROHS3 compliant. Substitute parts are identified when equivalent resistance values, package dimensions, and thermal specifications align within acceptable engineering tolerances for the application.

Substiute Parts

RT0805FRE0759KL

YAGEOIn Stock: 1188RT0805FRE0759KL Datasheet

Current PartRFQ

RT0805BRD0759KL

YAGEOIn Stock: 9636RT0805BRD0759KL Datasheet

UpgradeRFQ

7-2176093-3

TE Connectivity Passive ProductIn Stock: 28597-2176093-3 Datasheet

DirectRFQ

ERA-6AEB5902V

Panasonic Electronic ComponentsIn Stock: 10621ERA-6AEB5902V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805FRE0759KL are qualified based on the following criteria:

• Resistance Value: All substitutes maintain 59 kOhms nominal resistance
• Package Compatibility: All substitutes use 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W)
• Composition: All substitutes are thin film resistors
• Operating Temperature Range: All substitutes support -55°C to 155°C operation
• Compliance: All substitutes are ROHS3 compliant with MSL 1 rating

Substitutes are grouped by tolerance specification and power rating. The RT0805FRE0759KL (±1% tolerance) can be replaced by parts with equal or tighter tolerance (±0.1%). The TE Connectivity part (7-2176093-3) offers increased power rating (0.25W vs. 0.125W) while maintaining package compatibility.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD0759KL (YAGEO): Direct upgrade from the main part. Identical power rating and package with improved tolerance (±0.1% vs. ±1%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C). Suitable for applications requiring tighter tolerance specifications.

7-2176093-3 (TE Connectivity): Offers increased power dissipation capability (0.25W vs. 0.125W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Height specification is marginally increased (0.026" vs. 0.024"). Selection appropriate for applications with higher power requirements within the same footprint.

ERA-6AEB5902V (Panasonic): Automotive-grade part with AEC-Q200 qualification. Maintains 0.125W power rating with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Selection appropriate for automotive applications requiring AEC-Q200 compliance.

All substitutes maintain identical footprint compatibility and operating temperature range. Selection depends on tolerance requirements, power dissipation needs, and application-specific certifications.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0759KL replace RT0805FRE0759KL in any application?

A: Yes. The RT0805BRD0759KL is a direct substitute with identical package, resistance value, and power rating. The improved tolerance (±0.1% vs. ±1%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C) make it suitable for all applications where the original part is used.

Q: What is the difference between the TE Connectivity 7-2176093-3 and the main part?

A: The primary difference is power rating: 7-2176093-3 is rated for 0.25W (1/4W) compared to 0.125W (1/8W) for RT0805FRE0759KL. Both use identical 0805 package footprint. The TE part also features ±0.1% tolerance and ±25ppm/°C temperature coefficient. Height is marginally increased (0.026" vs. 0.024").

Q: When should ERA-6AEB5902V be selected?

A: ERA-6AEB5902V is the appropriate choice for automotive applications requiring AEC-Q200 qualification. It maintains the same 0.125W power rating and 0805 package as the main part while providing ±0.1% tolerance and ±25ppm/°C temperature coefficient.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level, matching the compliance profile of the main part.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. All substitute parts use the identical 0805 (2012 Metric) package with matching footprint dimensions (0.079" L x 0.049" W). PCB layout modifications are not required for substitution.