Equivalent & Substitute Parts for RT0805FRE0757K6L

Part Overview

The RT0805FRE0757K6L is a 57.6 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO, this component is actively produced and RoHS3 compliant. Substitute parts are identified based on matching resistance value, package form factor, and operating temperature range while accommodating variations in tolerance, power rating, and composition specifications.

Substiute Parts

RT0805FRE0757K6L

YAGEOIn Stock: 949RT0805FRE0757K6L Datasheet

Current PartRFQ

RT0805BRD0757K6L

YAGEOIn Stock: 6125RT0805BRD0757K6L Datasheet

UpgradeRFQ

7-2176093-2

TE Connectivity Passive ProductIn Stock: 29017-2176093-2 Datasheet

DirectRFQ

ERA-6AEB5762V

Panasonic Electronic ComponentsIn Stock: 7868ERA-6AEB5762V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE0757K6L is determined by the following criteria:

Primary Matching Parameters:

• Resistance value: 57.6 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Operating temperature range: -55°C ~ 155°C (minimum requirement)
• Composition: Thin Film (preferred for consistency)

Allowable Variations:

• Tolerance: May be equal to or tighter than ±1%
• Power rating: May be equal to or greater than 0.125W
• Temperature coefficient: May be equal to or lower than ±50ppm/°C
• RoHS and MSL compliance: Must maintain or exceed current status

Three substitute parts meet these criteria and are grouped as follows:

Upgrade Category (Tighter Tolerance): RT0805BRD0757K6L (YAGEO) and ERA-6AEB5762V (Panasonic) both offer ±0.1% tolerance with ±25ppm/°C temperature coefficient, representing improved precision over the original specification.

Direct Substitute (Higher Power Rating): 7-2176093-2 (TE Connectivity) provides ±0.1% tolerance and 0.25W power rating in the same 0805 package, suitable for applications requiring higher power dissipation margin.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD0757K6L (YAGEO): Direct upgrade within the same manufacturer series. Offers improved tolerance specification (±0.1% vs ±1%) and reduced temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating and package. Suitable for applications requiring tighter resistance accuracy without power rating changes. RoHS3 compliant with unlimited MSL rating.

7-2176093-2 (TE Connectivity): Provides higher power dissipation capability (0.25W vs 0.125W) in the same 0805 package footprint. Maintains ±0.1% tolerance and ±25ppm/°C temperature coefficient. Appropriate for designs requiring increased thermal margin or higher current handling in the same physical space. RoHS3 compliant with unlimited MSL rating.

ERA-6AEB5762V (Panasonic): Automotive-grade component certified to AEC-Q200 standard. Delivers ±0.1% tolerance and ±25ppm/°C temperature coefficient with identical power rating to the main part. Suitable for automotive and high-reliability applications where AEC-Q200 qualification is required. RoHS3 compliant with unlimited MSL rating.

All substitute parts maintain full compatibility with the original 0805 (2012 Metric) package footprint and operating temperature range of -55°C to 155°C.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0757K6L be used as a direct replacement for RT0805FRE0757K6L?

A: Yes. Both components share identical resistance value (57.6 kOhms), package (0805), power rating (0.125W), and operating temperature range (-55°C ~ 155°C). The substitute offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it suitable for applications where tighter accuracy is beneficial or required.

Q: What is the difference between the main part and 7-2176093-2?

A: The primary difference is power rating: 7-2176093-2 is rated at 0.25W (1/4W) compared to 0.125W (1/8W) for the main part. Both maintain 57.6 kOhms resistance, 0805 package, and -55°C ~ 155°C operating range. The higher power rating provides greater thermal headroom in applications with higher current or power dissipation requirements.

Q: Is ERA-6AEB5762V suitable for automotive applications?

A: Yes. ERA-6AEB5762V is certified to AEC-Q200 automotive standard and is specifically designed for automotive-grade applications. It maintains the same 57.6 kOhms resistance, 0805 package, and 0.125W power rating as the main part, with improved tolerance (±0.1%) and temperature coefficient (±25ppm/°C).

Q: Do all substitute parts fit the same PCB footprint?

A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and are designed for the same PCB land pattern. Maximum seated height varies slightly (0.024" to 0.026") but remains within standard 0805 assembly tolerances.

Q: Are all parts RoHS3 compliant?

A: Yes. The main part RT0805FRE0757K6L and all three substitute parts (RT0805BRD0757K6L, 7-2176093-2, and ERA-6AEB5762V) are RoHS3 compliant with MSL rating of 1 (Unlimited), ensuring compatibility with modern manufacturing and environmental requirements.

Q: Which substitute should I choose for precision analog circuits?

A: For applications requiring tight tolerance and low temperature drift, both RT0805BRD0757K6L and ERA-6AEB5762V are suitable, each offering ±0.1% tolerance and ±25ppm/°C temperature coefficient. Select ERA-6AEB5762V if automotive AEC-Q200 qualification is required; otherwise, RT0805BRD0757K6L provides equivalent electrical performance from the same manufacturer series.