RT0805FRE07576RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07576RL is a 576 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package format, rated for 0.125W (1/8W) power dissipation. This YAGEO component operates across -55°C to 155°C and is ROHS3 compliant with MSL 1 rating. The part is currently active in production with inventory availability. Equivalent and substitute parts are identified to support procurement flexibility, design optimization, and supply chain continuity.

Substiute Parts

RT0805FRE07576RL

YAGEOIn Stock: 1065RT0805FRE07576RL Datasheet

Current PartRFQ

RT0805BRD07576RL

YAGEOIn Stock: 2642RT0805BRD07576RL Datasheet

UpgradeRFQ

9-2176091-5

TE Connectivity Passive ProductIn Stock: 12819-2176091-5 Datasheet

DirectRFQ

ERA-6AEB5760V

Panasonic Electronic ComponentsIn Stock: 8035ERA-6AEB5760V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Substitution Criteria:

• Identical resistance value: 576 Ohms
• Identical package format: 0805 (2012 Metric)
• Identical composition: Thin Film
• Identical operating temperature range: -55°C ~ 155°C
• Identical termination count: 2

Secondary Compatibility Factors:

• Tolerance: Equal or tighter tolerance acceptable (±1% or better)
• Power rating: Equal or higher power rating acceptable (0.125W or greater)
• Temperature coefficient: Lower values acceptable (±50ppm/°C or better)
• Compliance: ROHS3 and MSL 1 maintained across all substitutes

The following parts meet substitution criteria:

RT0805BRD07576RL (YAGEO) – Upgrade substitute with improved tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C)

9-2176091-5 (TE Connectivity) – Direct substitute with higher power rating (0.25W) and improved tolerance (±0.1%)

ERA-6AEB5760V (Panasonic) – Upgrade substitute with automotive AEC-Q200 qualification, improved tolerance (±0.1%), and lower temperature coefficient (±25ppm/°C)

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD07576RL is suitable for applications requiring improved tolerance performance (±0.1%) and lower temperature coefficient (±25ppm/°C) while maintaining identical power rating and package dimensions. Both YAGEO parts share the same series designation and manufacturing standards.

9-2176091-5 is suitable for applications with higher power dissipation requirements (0.25W vs. 0.125W). The increased seated height (0.026" vs. 0.024") must be evaluated for PCB clearance compatibility. Tolerance and temperature coefficient are improved.

ERA-6AEB5760V is suitable for automotive applications requiring AEC-Q200 qualification. This Panasonic component provides improved tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C) with automotive-grade reliability standards. All parts maintain ROHS3 compliance and MSL 1 rating.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07576RL replace RT0805FRE07576RL in any application?

A: Yes. RT0805BRD07576RL is a direct substitute with identical package, resistance, power rating, and operating temperature range. The improved tolerance (±0.1% vs. ±1%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C) make it suitable for all applications requiring the original part.

Q: What is the key difference between 9-2176091-5 and the other substitutes?

A: The 9-2176091-5 has a higher power rating (0.25W vs. 0.125W) and slightly increased seated height (0.026" vs. 0.024"). It is manufactured by TE Connectivity under the RP73P series. The higher power rating supports applications with greater thermal dissipation requirements.

Q: Is ERA-6AEB5760V suitable for non-automotive applications?

A: Yes. ERA-6AEB5760V meets all electrical and mechanical parameters for the original RT0805FRE07576RL. The AEC-Q200 automotive qualification is an additional feature that does not restrict use in general industrial or consumer applications.

Q: Are there any PCB layout considerations when substituting these parts?

A: The 9-2176091-5 has a maximum seated height of 0.026" compared to 0.024" for other substitutes. Verify PCB clearance and component spacing if height-constrained layouts are present. All other substitutes maintain identical footprint and height specifications.

Q: Do all substitute parts maintain the same moisture sensitivity level?

A: Yes. All substitute parts maintain MSL 1 (Unlimited) rating, identical to the original RT0805FRE07576RL. Storage and handling requirements are equivalent across all parts.