Equivalent & Substitute Parts for RT0805FRE0756R2L

Part Overview

The RT0805FRE0756R2L is a 56.2 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL 1 (Unlimited) moisture sensitivity rating. Equivalent and substitute parts are identified based on matching resistance value, package form factor, and electrical performance parameters while accommodating variations in tolerance, power rating, and temperature coefficient specifications.

Substiute Parts

RT0805FRE0756R2L

YAGEOIn Stock: 1137RT0805FRE0756R2L Datasheet

Current PartRFQ

RT0805BRD0756R2L

YAGEOIn Stock: 10963RT0805BRD0756R2L Datasheet

UpgradeRFQ

9-1625868-9

TE Connectivity Passive ProductIn Stock: 31449-1625868-9 Datasheet

DirectRFQ

ERA-6AEB56R2V

Panasonic Electronic ComponentsIn Stock: 7368ERA-6AEB56R2V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805FRE0756R2L are qualified based on the following criteria:

Primary Matching Parameters:

• Resistance value: 56.2 Ohms (exact match required)
• Package form factor: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)

Allowable Variations:

• Tolerance: ±1% or tighter (±0.1% acceptable as upgrade)
• Power rating: 0.125W or higher (0.25W acceptable as upgrade)
• Temperature coefficient: ±50ppm/°C or tighter (±25ppm/°C acceptable as upgrade)
• Manufacturer: Different manufacturers permitted if all primary parameters match

Three substitute parts meet these criteria and are grouped as follows:

Upgrade Category (Tighter Tolerance): RT0805BRD0756R2L (YAGEO), ERA-6AEB56R2V (Panasonic)

Direct Equivalent (Higher Power Rating): 9-1625868-9 (TE Connectivity Passive Product)

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD0756R2L (YAGEO): This upgrade substitute offers tighter tolerance (±0.1% versus ±1%) and improved temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical power rating and package dimensions. ROHS3 compliance and MSL 1 rating are preserved. Selection is appropriate for applications requiring enhanced precision without power or thermal constraints.

9-1625868-9 (TE Connectivity Passive Product): This direct equivalent provides higher power dissipation capability (0.25W versus 0.125W) with tighter tolerance and improved temperature coefficient. The seated height increases by 0.002" (0.05mm) to 0.026" (0.65mm). ROHS3 compliance is maintained. Selection is appropriate for applications with elevated power requirements or thermal margin considerations, provided PCB layout accommodates the marginal height increase.

ERA-6AEB56R2V (Panasonic Electronic Components): This upgrade substitute combines tighter tolerance (±0.1%) and improved temperature coefficient (±25ppm/°C) with automotive AEC-Q200 qualification. Identical power rating and package dimensions are maintained. ROHS3 compliance and MSL 1 rating are preserved. Selection is appropriate for automotive applications or systems requiring automotive-grade component reliability.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0756R2L replace RT0805FRE0756R2L in any application?

A: Yes. RT0805BRD0756R2L is a direct substitute with identical package, power rating, and operating temperature range. The tighter tolerance (±0.1% versus ±1%) and improved temperature coefficient (±25ppm/°C versus ±50ppm/°C) represent performance enhancements with no compatibility concerns.

Q: Is 9-1625868-9 suitable for all applications using RT0805FRE0756R2L?

A: 9-1625868-9 is electrically compatible with identical resistance, tolerance, and temperature coefficient. The higher power rating (0.25W versus 0.125W) is a performance upgrade. The seated height increases from 0.024" to 0.026" (0.05mm difference). Verify PCB layout clearance before substitution in space-constrained designs.

Q: What is the difference between RT0805FRE0756R2L and ERA-6AEB56R2V?

A: Both parts share identical resistance, power rating, package, and operating temperature range. ERA-6AEB56R2V offers tighter tolerance (±0.1% versus ±1%), improved temperature coefficient (±25ppm/°C versus ±50ppm/°C), and automotive AEC-Q200 qualification. Selection depends on application requirements for precision and automotive compliance.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. RT0805BRD0756R2L, 9-1625868-9, and ERA-6AEB56R2V are all ROHS3 compliant, matching the compliance status of the main part RT0805FRE0756R2L.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes, with one consideration. The 9-1625868-9 has a maximum seated height of 0.026" (0.65mm) compared to 0.024" (0.60mm) for the other parts. In applications with tight vertical clearance constraints, verify that the 0.002" height difference does not conflict with overlying components or assembly fixtures.

Q: Which substitute offers the best precision?

A: RT0805BRD0756R2L, 9-1625868-9, and ERA-6AEB56R2V all offer ±0.1% tolerance, which is tighter than the main part's ±1% tolerance. Selection among these three should be based on power requirements, automotive qualification needs, and manufacturer preference rather than tolerance alone.