RT0805FRE07562KL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07562KL is a 562 kOhms ±1% thin film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation and operates across the temperature range of -55°C to 155°C. The component is ROHS3 compliant and carries unlimited moisture sensitivity level (MSL 1), making it suitable for general industrial and commercial applications. Equivalent and substitute parts are identified to provide design flexibility, inventory alternatives, and performance upgrades where application requirements permit.

Substiute Parts

RT0805FRE07562KL

YAGEOIn Stock: 1000RT0805FRE07562KL Datasheet

Current PartRFQ

ERA-6AEB5623V

Panasonic Electronic ComponentsIn Stock: 14314ERA-6AEB5623V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805FRE07562KL are identified based on strict electrical and mechanical compatibility criteria. The primary substitution parameters are:

• Identical resistance value: 562 kOhms
• Identical package format: 0805 (2012 Metric)
• Identical power rating: 0.125W (1/8W)
• Identical composition: Thin Film
• Identical operating temperature range: -55°C to 155°C
• Identical physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Identical termination count: 2
• Identical RoHS and REACH compliance status

The ERA-6AEB5623V from Panasonic Electronic Components qualifies as a direct substitute based on these core parameters. Secondary differences in tolerance and temperature coefficient do not prevent substitution but represent performance enhancements available in the substitute part.

Parameter Comparison

Engineering Selection Recommendations

The RT0805FRE07562KL and ERA-6AEB5623V are electrically and mechanically interchangeable for applications requiring a 562 kOhms 0805 thin film resistor. Both components maintain active product status and full compliance with ROHS3 and REACH regulations.

The ERA-6AEB5623V offers enhanced performance characteristics through tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). The Panasonic component carries AEC-Q200 automotive qualification, which provides additional reliability assurance for applications subject to automotive environmental and performance standards.

Selection between these parts should be based on application-specific requirements for tolerance precision, temperature stability, and automotive qualification status. Both components are suitable for direct substitution in standard industrial and commercial circuit designs.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB5623V replace RT0805FRE07562KL in existing designs?

A: Yes. Both components share identical resistance value, package format, power rating, operating temperature range, and physical dimensions. Direct substitution is mechanically and electrically compatible.

Q: What are the key differences between these parts?

A: The primary differences are tolerance specification (±0.1% versus ±1%), temperature coefficient (±25ppm/°C versus ±50ppm/°C), and automotive qualification (AEC-Q200 for Panasonic only). The Panasonic part provides tighter tolerance and lower temperature drift.

Q: Are both parts suitable for high-precision applications?

A: The ERA-6AEB5623V is better suited for applications requiring tight tolerance control due to its ±0.1% specification. The RT0805FRE07562KL with ±1% tolerance is appropriate for general-purpose applications where tolerance requirements are less stringent.

Q: Do these parts require different PCB footprints?

A: No. Both components use identical 0805 (2012 Metric) package format with matching physical dimensions and termination configuration. PCB footprints are interchangeable.

Q: Is the Panasonic part suitable for automotive applications?

A: Yes. The ERA-6AEB5623V carries AEC-Q200 automotive qualification, making it suitable for automotive-grade circuit designs. The YAGEO part does not carry this certification.

Q: What is the moisture sensitivity level for both parts?

A: Both components are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.