RT0805FRE07560KL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07560KL is a 560 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface-mount device is rated for 0.125W (1/8W) power dissipation and operates across -55°C to 155°C. The part is ROHS3 compliant, REACH unaffected, and maintains MSL 1 (unlimited moisture sensitivity level). Substitute parts are identified where electrical parameters (resistance value, power rating, package) and mechanical dimensions remain compatible, while tolerance, temperature coefficient, and manufacturing features may vary.

Key Parameters

Parameter	Value
Resistance	560 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Operating Temperature Range	-55°C to 155°C
Dimensions	0.079" L × 0.049" W (2.00mm × 1.25mm)
RoHS Status	ROHS3 Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by three core criteria:

Electrical Compatibility: Resistance value (560 kOhms) and power rating (0.125W) must be identical. Tolerance may be tighter (lower value) without functional impact.
Mechanical Compatibility: Package type (0805/2012 Metric), physical dimensions (0.079" L × 0.049" W), and termination count (2) must match for PCB assembly compatibility.
Environmental & Compliance: Operating temperature range (-55°C to 155°C), RoHS3 compliance, and MSL 1 rating must be maintained or exceeded.

The following parts meet these criteria and are grouped by tolerance grade and manufacturing features:

Standard Grade (±1%): RT0805FRE07560KL (original)
Precision Grade (±0.1%): RT0805BRE07560KL, RT0805BRD07560KL, ERA-6AEB564V, RG2012P-564-B-T5
Precision Grade with Relaxed Tolerance (±0.5%): RG2012P-564-D-T5

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	Height Max (mm)	Features	RoHS3	MSL
RT0805FRE07560KL	YAGEO	560 kΩ	±1%	0.125	±50	-55 to 155	0805	0.60	—	Yes	1
RT0805BRE07560KL	YAGEO	560 kΩ	±0.1%	0.125	±50	-55 to 155	0805	0.60	—	Yes	1
RT0805BRD07560KL	YAGEO	560 kΩ	±0.1%	0.125	±25	-55 to 155	0805	0.60	—	Yes	1
ERA-6AEB564V	Panasonic Electronic Components	560 kΩ	±0.1%	0.125	±25	-55 to 155	0805	0.60	Automotive AEC-Q200	Yes	1
RG2012P-564-B-T5	Susumu	560 kΩ	±0.1%	0.125	±25	-55 to 155	0805	0.50	Anti-Sulfur, Automotive AEC-Q200	Yes	1
RG2012P-564-D-T5	Susumu	560 kΩ	±0.5%	0.125	±25	-55 to 155	0805	0.50	Anti-Sulfur, Automotive AEC-Q200	Yes	1

Engineering Selection Recommendations

For Direct Replacement (Identical Tolerance)

No substitute parts maintain the original ±1% tolerance. All listed alternatives offer ±0.1% or ±0.5% tolerance, which represents improved precision and is functionally compatible in applications where the original tolerance is acceptable.

For Precision-Grade Applications (±0.1% Tolerance)

RT0805BRE07560KL and RT0805BRD07560KL (YAGEO) provide tighter tolerance with identical RoHS3 and MSL compliance. RT0805BRD07560KL offers improved temperature coefficient (±25ppm/°C vs. ±50ppm/°C), beneficial for temperature-sensitive circuits.

For Automotive and High-Reliability Applications

ERA-6AEB564V (Panasonic) and RG2012P-564-B-T5 (Susumu) carry AEC-Q200 automotive qualification. RG2012P-564-B-T5 adds anti-sulfur protection and features a reduced maximum height (0.50mm vs. 0.60mm), suitable for space-constrained assemblies.

For Cost-Optimized Selection with Relaxed Tolerance

RG2012P-564-D-T5 (Susumu) maintains ±0.5% tolerance with AEC-Q200 qualification and anti-sulfur protection. This option is suitable where ±0.5% tolerance meets circuit requirements.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and the full -55°C to 155°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRE07560KL replace RT0805FRE07560KL directly?

A: Yes. Both parts share identical resistance (560 kΩ), power rating (0.125W), package (0805), dimensions, and operating temperature range. RT0805BRE07560KL offers tighter tolerance (±0.1% vs. ±1%), which is a functional improvement. Verify circuit tolerance requirements before selection.

Q: What is the difference between RT0805BRE07560KL and RT0805BRD07560KL?

A: Both offer ±0.1% tolerance and identical dimensions. RT0805BRD07560KL features a lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C), providing better stability across the -55°C to 155°C operating range. Select RT0805BRD07560KL for temperature-sensitive applications.

Q: Are Susumu RG2012P-564 parts suitable for non-automotive applications?

A: Yes. AEC-Q200 qualification indicates automotive-grade reliability and is not restricted to automotive use. RG2012P-564-B-T5 and RG2012P-564-D-T5 are compatible with general industrial and consumer applications. The anti-sulfur feature provides additional environmental protection.

Q: What is the significance of the 0.50mm vs. 0.60mm height difference?

A: RG2012P-564 series (0.50mm max height) are lower-profile components suitable for space-constrained PCB designs. This difference is critical for high-density assemblies or applications with height restrictions. Verify PCB footprint clearance before substitution.

Q: Can RG2012P-564-D-T5 (±0.5%) replace the original ±1% part?

A: Yes. ±0.5% tolerance is tighter than the original ±1%, ensuring improved accuracy. This substitution is valid for all applications where the original tolerance was acceptable.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (unlimited) rating, matching the original part's environmental and regulatory status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message