Equivalent & Substitute Parts for RT0805FRE0753R6L

Part Overview

The RT0805FRE0753R6L is a 53.6 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. This YAGEO component operates across -55°C to 155°C and is ROHS3 compliant with MSL 1 rating. The part is currently active in production with 1019 units in stock. Equivalent and substitute parts are identified based on matching resistance value, package form factor, and electrical performance within acceptable tolerance and power rating parameters.

Substiute Parts

RT0805FRE0753R6L

YAGEOIn Stock: 1116RT0805FRE0753R6L Datasheet

Current PartRFQ

RT0805BRD0753R6L

YAGEOIn Stock: 2540RT0805BRD0753R6L Datasheet

UpgradeRFQ

9-1625868-7

TE Connectivity Passive ProductIn Stock: 8199-1625868-7 Datasheet

DirectRFQ

ERA-6AEB53R6V

Panasonic Electronic ComponentsIn Stock: 10905ERA-6AEB53R6V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE0753R6L is determined by the following criteria:

Primary Matching Parameters:

• Resistance value: 53.6 Ohms (exact match required)
• Package form factor: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating temperature range: -55°C ~ 155°C (minimum requirement)
• RoHS compliance: ROHS3 Compliant (minimum requirement)

Secondary Compatibility Parameters:

• Tolerance: ±1% or better (tighter tolerance acceptable)
• Power rating: 0.125W minimum (higher ratings acceptable)
• Temperature coefficient: ±50ppm/°C or better (lower values acceptable)
• MSL rating: 1 (Unlimited) or equivalent

Three substitute parts meet these criteria with varying tolerance and power specifications.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD0753R6L (YAGEO Upgrade): This part provides improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical power rating, package dimensions, and height specifications. All compliance certifications match the main part. This represents a direct upgrade path within the same manufacturer series.

9-1625868-7 (TE Connectivity Direct Substitute): This TE Connectivity part maintains all critical package and electrical parameters with the exception of increased power rating (0.25W versus 0.125W) and slightly increased seated height (0.026" versus 0.024"). The higher power rating provides additional thermal margin. Temperature coefficient and tolerance specifications are equivalent to the YAGEO upgrade option. This part is suitable for applications where the additional power dissipation capability is beneficial or neutral.

ERA-6AEB53R6V (Panasonic Upgrade with AEC-Q200): This Panasonic part offers ±0.1% tolerance and ±25ppm/°C temperature coefficient matching the YAGEO upgrade, with the addition of AEC-Q200 automotive qualification. Physical dimensions and height are identical to the main part. This option is appropriate for automotive or high-reliability applications requiring automotive-grade component certification.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0753R6L replace RT0805FRE0753R6L in all applications?

A: Yes. The RT0805BRD0753R6L maintains identical package form factor, power rating, and operating temperature range. The improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) make it functionally compatible and superior in precision-critical applications.

Q: What is the difference between the 0.125W and 0.25W power ratings?

A: The 9-1625868-7 is rated for 0.25W continuous power dissipation compared to 0.125W for the main part. This higher rating provides additional thermal headroom but does not affect electrical performance at equivalent current levels. The part is suitable for applications where the original 0.125W rating is marginal.

Q: Are all substitute parts in the same 0805 package?

A: Yes. All substitute parts use the 0805 (2012 Metric) package form factor with identical length and width (0.079" L x 0.049" W). The 9-1625868-7 has a maximum seated height of 0.026" compared to 0.024" for other parts, which may be relevant in space-constrained applications.

Q: What does AEC-Q200 certification mean for the ERA-6AEB53R6V?

A: AEC-Q200 is an automotive industry qualification standard for passive components. The ERA-6AEB53R6V meets this specification, making it suitable for automotive applications requiring qualified component documentation. Non-automotive applications are not affected by this certification.

Q: Can I use these parts interchangeably on the same PCB?

A: Yes. All substitute parts share identical 0805 package footprints and lead spacing. The 9-1625868-7 has a slightly increased seated height (0.026" versus 0.024"), which is negligible for standard PCB assembly processes.

Q: Which substitute offers the best tolerance specification?

A: RT0805BRD0753R6L, 9-1625868-7, and ERA-6AEB53R6V all offer ±0.1% tolerance, which is superior to the main part's ±1% specification. Selection between these three should be based on availability, power rating requirements, and certification needs rather than tolerance performance.