RT0805FRE07536RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07536RL is a 536 Ohms ±1% thin film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The component is ROHS3 compliant and carries unlimited moisture sensitivity level (MSL 1), making it suitable for general industrial and commercial applications. Alternative parts may be required due to inventory constraints, specific tolerance requirements, or application-specific certifications such as automotive qualification.

Substiute Parts

RT0805FRE07536RL

YAGEOIn Stock: 1061RT0805FRE07536RL Datasheet

Current PartRFQ

9-2176091-2

TE Connectivity Passive ProductIn Stock: 28919-2176091-2 Datasheet

DirectRFQ

ERA-6AEB5360V

Panasonic Electronic ComponentsIn Stock: 8269ERA-6AEB5360V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07536RL is determined by the following criteria:

Mandatory Parameters (Must Match):

• Resistance value: 536 Ohms
• Package format: 0805 (2012 Metric)
• Composition: Thin Film
• Operating temperature range: -55°C to 155°C minimum

Allowable Variations:

• Tolerance may be equal to or tighter than ±1%
• Power rating may be equal to or greater than 0.125W
• Temperature coefficient may be equal to or lower in absolute value
• RoHS and regulatory compliance status may differ based on application requirements

The identified substitute parts meet all mandatory parameters while offering improvements in tolerance accuracy and/or power handling capability.

Parameter Comparison

Engineering Selection Recommendations

9-2176091-2 (TE Connectivity Passive Product): This substitute offers improved tolerance (±0.1% versus ±1%) and increased power rating (0.25W versus 0.125W). However, this part is RoHS non-compliant, which may restrict its use in applications requiring regulatory compliance with ROHS3 standards. Selection of this part should be limited to legacy systems or applications where RoHS compliance is not mandated.

ERA-6AEB5360V (Panasonic Electronic Components): This substitute provides tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining the same power rating and package format as the original part. The component carries AEC-Q200 automotive qualification and ROHS3 compliance, making it suitable for automotive and regulated industrial applications where enhanced precision and environmental qualification are required.

Frequently Asked Questions (FAQ)

Q: Can the 9-2176091-2 be used as a direct replacement for the RT0805FRE07536RL?

A: The 9-2176091-2 is electrically compatible in terms of resistance value and package format. However, it is RoHS non-compliant, which may violate procurement or regulatory requirements. Additionally, the increased power rating (0.25W) and improved tolerance (±0.1%) represent design changes that should be evaluated against circuit requirements.

Q: What is the primary advantage of the ERA-6AEB5360V substitute?

A: The ERA-6AEB5360V combines ROHS3 compliance with AEC-Q200 automotive qualification, tighter tolerance (±0.1%), and lower temperature coefficient (±25ppm/°C). These characteristics make it suitable for precision circuits and automotive applications where environmental and regulatory standards are critical.

Q: Are all substitute parts available in the same 0805 package?

A: Yes. All listed substitute parts use the 0805 (2012 Metric) package format with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm), ensuring mechanical compatibility on printed circuit boards.

Q: Does tolerance improvement affect circuit performance?

A: Tighter tolerance (±0.1% versus ±1%) reduces resistor value variation across production batches. In precision analog circuits, voltage dividers, or gain-setting networks, this improvement may enhance circuit accuracy and reduce calibration requirements.

Q: Can the higher power-rated 9-2176091-2 be used in applications designed for 0.125W?

A: Yes. A component rated for higher power dissipation can be used in applications requiring lower power. However, the physical dimensions and thermal characteristics may differ slightly, requiring verification of thermal performance in the specific application context.