Equivalent & Substitute Parts for RT0805FRE07487KL

Part Overview

The RT0805FRE07487KL is a 487 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. This YAGEO component is actively produced and ROHS3 compliant. Substitute parts are identified to address inventory availability, tolerance requirements, power rating needs, or automotive qualification specifications while maintaining electrical and mechanical compatibility within the 0805 package form factor.

Substiute Parts

RT0805FRE07487KL

YAGEOIn Stock: 877RT0805FRE07487KL Datasheet

Current PartRFQ

RT0805BRD07487KL

YAGEOIn Stock: 20860RT0805BRD07487KL Datasheet

UpgradeRFQ

5-2176094-9

TE Connectivity Passive ProductIn Stock: 16685-2176094-9 Datasheet

DirectRFQ

ERA-6AEB4873V

Panasonic Electronic ComponentsIn Stock: 3097ERA-6AEB4873V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07487KL is determined by the following criteria:

Mandatory Parameters (Must Match):

• Resistance value: 487 kOhms
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Operating Temperature Range: -55°C ~ 155°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS Status: ROHS3 Compliant

Allowable Variations:

• Tolerance: May be equal to or tighter than ±1% (±0.1% is acceptable)
• Power Rating: May be equal to or greater than 0.125W (0.25W is acceptable)
• Temperature Coefficient: May be equal to or tighter than ±50ppm/°C (±25ppm/°C is acceptable)
• Manufacturer: Different manufacturers permitted if all parameters align
• Packaging Format: Tape & Reel (TR) or Cut Tape (CT) both acceptable
• Automotive Qualification: AEC-Q200 certification is an upgrade feature, not a restriction

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD07487KL (YAGEO): Direct upgrade from RT0805FRE07487KL with tighter tolerance (±0.1% vs ±1%) and improved temperature coefficient (±25ppm/°C vs ±50ppm/°C). Identical power rating and package. Suitable for applications requiring higher precision without additional thermal or power constraints. Active product status with high inventory availability.

5-2176094-9 (TE Connectivity Passive Product): Functionally compatible with enhanced power rating (0.25W vs 0.125W). Tighter tolerance and temperature coefficient match RT0805BRD07487KL. Appropriate for circuits where increased power dissipation margin is beneficial. Supplied in Cut Tape format. Active product status.

ERA-6AEB4873V (Panasonic Electronic Components): Equivalent electrical specifications to RT0805BRD07487KL with addition of AEC-Q200 automotive qualification. Identical tolerance, temperature coefficient, and power rating. Required for automotive applications or systems requiring automotive-grade component certification. Active product status.

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and -55°C to 155°C operating temperature range. Selection should be based on tolerance precision requirements, power dissipation margin needs, and automotive qualification necessity.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07487KL replace RT0805FRE07487KL in any application?

A: Yes. RT0805BRD07487KL meets or exceeds all electrical and mechanical parameters of RT0805FRE07487KL. The tighter tolerance (±0.1% vs ±1%) and improved temperature coefficient (±25ppm/°C vs ±50ppm/°C) make it suitable for all applications where the original part is specified.

Q: What is the difference between 5-2176094-9 and the YAGEO alternatives?

A: 5-2176094-9 is manufactured by TE Connectivity and has a higher power rating (0.25W vs 0.125W). Electrical specifications for resistance, tolerance, and temperature coefficient are equivalent to RT0805BRD07487KL. The primary difference is increased power dissipation capability and Cut Tape packaging format.

Q: When should ERA-6AEB4873V be used instead of other substitutes?

A: ERA-6AEB4873V is the appropriate choice for automotive applications or systems requiring AEC-Q200 qualified components. Electrical and mechanical specifications are equivalent to RT0805BRD07487KL. Use this part when automotive qualification is a design or procurement requirement.

Q: Are all substitute parts in the same 0805 package?

A: Yes. All listed parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Height variations are minimal (0.024" to 0.026" seated maximum) and do not affect PCB assembly compatibility.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes, provided the circuit design accommodates the tolerance and temperature coefficient specifications of the selected substitute. For applications sensitive to resistance value drift or requiring tight tolerance control, verify that the substitute's tolerance and temperature coefficient meet circuit requirements.

Q: What is the significance of the ±50ppm/°C vs ±25ppm/°C temperature coefficient difference?

A: Temperature coefficient indicates resistance value change per degree Celsius. The ±50ppm/°C specification of RT0805FRE07487KL results in greater resistance drift across the -55°C to 155°C operating range compared to ±25ppm/°C alternatives. For temperature-sensitive applications, tighter temperature coefficient specifications reduce circuit performance variation.