Equivalent & Substitute Parts for RT0805FRE07360KL

Part Overview

The RT0805FRE07360KL is a 360 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface-mount device is rated for 0.125W (1/8W) power dissipation and operates across -55°C to 155°C. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance requirements can be met by alternative manufacturers while maintaining or improving tolerance and temperature coefficient specifications.

Substiute Parts

RT0805FRE07360KL

YAGEOIn Stock: 4430RT0805FRE07360KL Datasheet

Current PartRFQ

RT0805BRD07360KL

YAGEOIn Stock: 1494RT0805BRD07360KL Datasheet

UpgradeRFQ

ERA-6AEB364V

Panasonic Electronic ComponentsIn Stock: 14250ERA-6AEB364V Datasheet

UpgradeRFQ

RG2012P-364-B-T5

SusumuIn Stock: 5949RG2012P-364-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following mandatory parameters:

• Resistance Value: Must be 360 kOhms
• Package / Case: Must be 0805 (2012 Metric)
• Composition: Must be Thin Film
• Power Rating: Must be 0.125W (1/8W) minimum
• Operating Temperature Range: Must cover -55°C ~ 155°C
• RoHS Status: Must maintain ROHS3 Compliance
• Moisture Sensitivity Level: Must be MSL 1 or equivalent

Substitute parts identified below meet all mandatory parameters. Tolerance and temperature coefficient may be equal to or better than the main part specification. Automotive AEC-Q200 certification and anti-sulfur features are additional qualifications present in certain substitutes but are not required for basic substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain Active product status and ROHS3 compliance. Selection between substitutes depends on application-specific requirements:

RT0805BRD07360KL (YAGEO): Maintains manufacturer continuity with improved tolerance (±0.1% vs ±1%) and reduced temperature coefficient (±25ppm/°C vs ±50ppm/°C). Suitable for applications requiring tighter tolerance specifications without automotive qualification requirements.

ERA-6AEB364V (Panasonic Electronic Components): Provides AEC-Q200 automotive qualification with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Appropriate for automotive and mission-critical applications requiring automotive-grade component certification.

RG2012P-364-B-T5 (Susumu): Combines AEC-Q200 automotive qualification with anti-sulfur feature and ±0.1% tolerance. Reduced seated height (0.020" vs 0.024") may be relevant for space-constrained designs. Suitable for harsh environment and automotive applications requiring sulfur resistance.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07360KL replace RT0805FRE07360KL in any application?

A: Yes. RT0805BRD07360KL meets all mandatory substitution parameters. The improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) make it functionally superior for equivalent or better performance in the same circuit.

Q: What is the difference between automotive-qualified and non-automotive substitutes?

A: ERA-6AEB364V and RG2012P-364-B-T5 carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and testing standards. Non-automotive substitutes (RT0805BRD07360KL) do not carry this certification. Use automotive-qualified parts only when application requirements explicitly mandate AEC-Q200 compliance.

Q: Does the anti-sulfur feature of RG2012P-364-B-T5 affect general compatibility?

A: No. Anti-sulfur treatment is an additional feature that does not impact electrical or mechanical compatibility. It provides enhanced reliability in environments with sulfur exposure. The feature is beneficial but not required for standard applications.

Q: Are there package compatibility concerns between these substitutes?

A: All substitutes use 0805 (2012 Metric) package with identical footprints. RG2012P-364-B-T5 has a reduced seated height (0.020" vs 0.024"), which may be advantageous in space-constrained designs but does not prevent direct substitution on standard PCB layouts.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. All substitutes share identical resistance value, power rating, package, and operating temperature range. They are mechanically and electrically interchangeable. Tolerance and temperature coefficient improvements in substitute parts do not create compatibility issues.