RT0805FRE07357RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07357RL is a 357 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is manufactured by YAGEO and is currently in active production status with ROHS3 compliance. Finding equivalent and substitute parts may be necessary due to inventory availability, supply chain optimization, or specific application requirements such as improved tolerance, enhanced temperature stability, or automotive qualification.

Substiute Parts

RT0805FRE07357RL

YAGEOIn Stock: 1001RT0805FRE07357RL Datasheet

Current PartRFQ

7-2176091-5

TE Connectivity Passive ProductIn Stock: 16637-2176091-5 Datasheet

DirectRFQ

ERA-6AEB3570V

Panasonic Electronic ComponentsIn Stock: 14752ERA-6AEB3570V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07357RL is determined by the following critical parameters:

• Resistance Value: Must be exactly 357 Ohms
• Package / Case: Must be 0805 (2012 Metric) for mechanical and electrical compatibility
• Composition: Thin film technology ensures consistent performance characteristics
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• Moisture Sensitivity Level: MSL 1 or better (unlimited moisture exposure tolerance)
• Number of Terminations: Must be 2-terminal configuration

Tolerance, power rating, temperature coefficient, and compliance certifications may vary within acceptable engineering parameters. Parts with improved tolerance (±0.1% vs ±1%), higher power ratings (0.25W vs 0.125W), or enhanced certifications (automotive AEC-Q200, ROHS3) are considered valid substitutes when all critical parameters are met.

Parameter Comparison

Engineering Selection Recommendations

RT0805FRE07357RL (YAGEO) - Primary specification. ROHS3 compliant with standard ±1% tolerance and ±50ppm/°C temperature coefficient. Suitable for general-purpose applications with standard tolerance requirements.

7-2176091-5 (TE Connectivity) - Direct substitute with improved tolerance (±0.1%) and higher power rating (0.25W). However, this part is RoHS non-compliant, which may restrict use in regulated applications or regions with RoHS requirements. Maximum seated height is 0.026" (0.65mm), which is 0.002" higher than the primary part and may affect PCB layout in space-constrained designs.

ERA-6AEB3570V (Panasonic) - Upgrade substitute with ±0.1% tolerance, automotive AEC-Q200 qualification, and ROHS3 compliance. Maintains the same power rating (0.125W) and seated height (0.024") as the primary part. Recommended for applications requiring improved tolerance stability, automotive-grade reliability, or enhanced regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can 7-2176091-5 be used as a direct replacement for RT0805FRE07357RL?

A: Yes, mechanically and electrically. However, the RoHS non-compliance status must be evaluated against your application requirements and regional regulations. The 0.002" height difference (0.026" vs 0.024") is negligible for most PCB designs but should be verified in space-constrained layouts.

Q: What is the advantage of ERA-6AEB3570V over the primary part?

A: ERA-6AEB3570V provides ±0.1% tolerance (versus ±1%), lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), and automotive AEC-Q200 qualification. These characteristics improve circuit accuracy and reliability in temperature-sensitive or automotive applications while maintaining ROHS3 compliance.

Q: Are all three parts mechanically interchangeable?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical length and width (0.079" x 0.049"). The maximum seated height varies slightly (0.024" to 0.026"), which is within standard PCB assembly tolerances for most applications.

Q: Which substitute should I select for a new design?

A: For new designs, ERA-6AEB3570V is recommended due to superior tolerance, lower temperature coefficient, automotive qualification, and ROHS3 compliance. This part provides the best long-term reliability and regulatory alignment.

Q: Can I use a higher power-rated part (0.25W) in place of a 0.125W specification?

A: Yes. A higher power rating provides additional thermal margin and does not negatively impact circuit performance. The 7-2176091-5 (0.25W) can safely replace the 0.125W primary part from a power dissipation perspective.