RT0805FRE07324KL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07324KL is a 324 kOhms ±1% thin film chip resistor manufactured by YAGEO in the 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation and operates across the temperature range of -55°C to 155°C. The component is ROHS3 compliant and carries an MSL rating of 1 (Unlimited), making it suitable for standard industrial and commercial applications. Equivalent and substitute parts are identified based on matching resistance value, package format, power rating, and operating temperature specifications to ensure direct functional replacement in circuit designs.

Substiute Parts

RT0805FRE07324KL

YAGEOIn Stock: 1077RT0805FRE07324KL Datasheet

Current PartRFQ

ERA-6AEB3243V

Panasonic Electronic ComponentsIn Stock: 20875ERA-6AEB3243V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805FRE07324KL are qualified based on the following critical parameters:

• Resistance value: 324 kOhms (exact match required)
• Package format: 0805 (2012 Metric) (exact match required)
• Power rating: 0.125W minimum (1/8W or higher acceptable)
• Operating temperature range: -55°C to 155°C minimum (equal or wider range acceptable)
• Composition: Thin film construction
• RoHS compliance: ROHS3 Compliant

The ERA-6AEB3243V from Panasonic Electronic Components qualifies as a direct substitute. While this part features improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), these represent performance enhancements rather than deviations from the core electrical and mechanical requirements. Both parts share identical resistance value, package format, power rating, operating temperature range, and RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the RT0805FRE07324KL and ERA-6AEB3243V are active products with full ROHS3 compliance and unlimited moisture sensitivity ratings. The ERA-6AEB3243V carries AEC-Q200 automotive qualification, which provides additional reliability assurance for applications requiring automotive-grade components. Selection between these parts should be based on application requirements: the YAGEO RT0805FRE07324KL is suitable for standard industrial applications, while the Panasonic ERA-6AEB3243V is appropriate for automotive and high-reliability applications where tighter tolerance and lower temperature coefficient specifications are beneficial.

Frequently Asked Questions (FAQ)

Q: Can the ERA-6AEB3243V replace the RT0805FRE07324KL in all applications?

A: Yes. Both parts share identical resistance value (324 kOhms), package format (0805), power rating (0.125W), and operating temperature range (-55°C to 155°C). The ERA-6AEB3243V features superior tolerance and temperature coefficient specifications, making it suitable for direct substitution.

Q: What is the significance of the ±0.1% tolerance on the ERA-6AEB3243V compared to the ±1% tolerance on the RT0805FRE07324KL?

A: The ERA-6AEB3243V provides tighter tolerance control, resulting in more precise resistance values. This is beneficial in precision analog circuits, measurement applications, and high-reliability systems where component accuracy directly impacts circuit performance.

Q: Are both parts available in the same packaging format?

A: Yes. Both the RT0805FRE07324KL and ERA-6AEB3243V are supplied in Tape & Reel (TR) packaging in the 0805 (2012 Metric) format with identical physical dimensions (0.079" L x 0.049" W, 2.00mm x 1.25mm) and maximum seated height (0.024", 0.60mm).

Q: What does AEC-Q200 qualification on the ERA-6AEB3243V indicate?

A: AEC-Q200 is an automotive industry standard qualification that certifies component reliability for automotive applications. This qualification is not required for general industrial use but is mandatory for automotive and safety-critical applications.

Q: Can these parts be used interchangeably on the same PCB assembly line?

A: Yes. Both parts are compatible with standard surface mount assembly processes for 0805 package components. No design or assembly modifications are required for substitution.