Equivalent & Substitute Parts for RT0805FRE07267RL

Part Overview

The RT0805FRE07267RL is a 267 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) operation. This YAGEO component is actively produced and ROHS3 compliant. Substitute parts are identified to address applications requiring improved tolerance specifications, enhanced power ratings, or automotive-grade certifications while maintaining electrical and mechanical compatibility.

Substiute Parts

RT0805FRE07267RL

YAGEOIn Stock: 849RT0805FRE07267RL Datasheet

Current PartRFQ

RT0805BRD07267RL

YAGEOIn Stock: 4854RT0805BRD07267RL Datasheet

UpgradeRFQ

6-2176091-4

TE Connectivity Passive ProductIn Stock: 21496-2176091-4 Datasheet

DirectRFQ

ERA-6AEB2670V

Panasonic Electronic ComponentsIn Stock: 1157ERA-6AEB2670V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805FRE07267RL are grouped based on the following allowed parameters:

Primary Substitution Criteria:

• Resistance value: 267 Ohms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)

Secondary Variation Parameters (allowable differences):

• Tolerance: May be improved from ±1% to ±0.1%
• Power rating: May be increased from 0.125W to 0.25W
• Temperature coefficient: May be improved from ±50ppm/°C to ±25ppm/°C
• Manufacturer: Alternative manufacturers permitted
• Automotive certification: AEC-Q200 rating available as upgrade option

All substitute parts maintain identical physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and termination count (2 terminations).

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD07267RL (YAGEO): Direct upgrade from the primary part. Maintains identical power rating and manufacturer series while providing improved tolerance (±0.1% vs ±1%) and reduced temperature coefficient (±25ppm/°C vs ±50ppm/°C). Recommended for applications requiring tighter tolerance specifications without power rating changes.

6-2176091-4 (TE Connectivity): Suitable for applications requiring increased power dissipation capability (0.25W vs 0.125W). Provides improved tolerance and temperature coefficient. Recommended for designs with higher current or thermal stress conditions while maintaining the 0805 package footprint.

ERA-6AEB2670V (Panasonic): Automotive-grade component with AEC-Q200 certification. Provides improved tolerance and temperature coefficient with identical power rating to the primary part. Recommended for automotive applications or systems requiring automotive-grade component qualification.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and identical operating temperature range (-55°C to 155°C).

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07267RL be used as a direct replacement for RT0805FRE07267RL?

A: Yes. Both parts share identical resistance value (267 Ohms), package (0805), power rating (0.125W), and operating temperature range (-55°C to 155°C). RT0805BRD07267RL provides improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) with no physical or electrical incompatibilities.

Q: When should 6-2176091-4 be selected instead of the primary part?

A: Select 6-2176091-4 when circuit design requires higher power dissipation. This TE Connectivity part is rated for 0.25W (1/4W) compared to the primary part's 0.125W (1/8W). Physical dimensions remain identical, enabling direct PCB footprint compatibility. Improved tolerance and temperature coefficient are additional benefits.

Q: Is ERA-6AEB2670V suitable for non-automotive applications?

A: Yes. ERA-6AEB2670V meets all electrical and mechanical requirements for standard industrial applications. AEC-Q200 automotive certification indicates enhanced reliability and quality assurance. This part is appropriate for any application accepting or requiring automotive-grade components.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging, matching the primary part's packaging specification. Physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and height (0.024" to 0.026" maximum seated height) are compatible across all parts.

Q: What is the significance of the temperature coefficient difference?

A: Temperature coefficient (ppm/°C) indicates resistance value drift across the operating temperature range. The primary part specifies ±50ppm/°C, while all substitute parts offer ±25ppm/°C. Lower temperature coefficient values result in more stable resistance performance across temperature extremes, beneficial for precision analog circuits and temperature-sensitive applications.

Q: Can these parts be intermixed on the same production run?

A: Electrical and mechanical compatibility permits intermixing on the same PCB assembly. However, tolerance and temperature coefficient differences may affect circuit performance in precision applications. Design validation should confirm acceptable performance across all specified part variants if intermixing is required.