RT0805FRE07232RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07232RL is a 232 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. As an active product with established supply availability, equivalent and substitute parts are available from multiple manufacturers offering improved tolerance specifications and enhanced automotive-grade certifications.

Substiute Parts

RT0805FRE07232RL

YAGEOIn Stock: 713RT0805FRE07232RL Datasheet

Current PartRFQ

RT0805BRD07232RL

YAGEOIn Stock: 2775RT0805BRD07232RL Datasheet

UpgradeRFQ

5-2176091-8

TE Connectivity Passive ProductIn Stock: 38995-2176091-8 Datasheet

DirectRFQ

ERA-6AEB2320V

Panasonic Electronic ComponentsIn Stock: 9450ERA-6AEB2320V Datasheet

UpgradeRFQ

RG2012P-2320-B-T5

SusumuIn Stock: 6043RG2012P-2320-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07232RL is determined by the following critical parameters: resistance value (232 Ohms), package type (0805 / 2012 Metric), composition (thin film), and operating temperature range (-55°C to 155°C). All substitute parts listed maintain these core specifications.

Substitute parts are grouped into two categories based on tolerance and power rating specifications:

Tolerance Upgrade Substitutes (±0.1%): RT0805BRD07232RL, ERA-6AEB2320V, and RG2012P-2320-B-T5 offer improved tolerance of ±0.1% compared to the original ±1% specification, with matching 0.125W power rating and identical package dimensions.

Power Rating Upgrade Substitute (0.25W): The 5-2176091-8 from TE Connectivity maintains ±0.1% tolerance but increases power rating to 0.25W (1/4W), suitable for applications requiring higher power dissipation within the same package footprint.

Parameter Comparison

Engineering Selection Recommendations

Standard Industrial Applications: RT0805BRD07232RL provides direct substitution with improved tolerance (±0.1%) and reduced temperature coefficient (±25ppm/°C) while maintaining identical power rating and package specifications. This part is suitable for general-purpose applications requiring enhanced precision.

Higher Power Dissipation Requirements: The 5-2176091-8 from TE Connectivity is selected when circuit design requires 0.25W power rating within the same 0805 package footprint. This part maintains ±0.1% tolerance and ±25ppm/°C temperature coefficient.

Automotive and High-Reliability Applications: ERA-6AEB2320V (Panasonic) and RG2012P-2320-B-T5 (Susumi) both carry AEC-Q200 automotive qualification. The RG2012P-2320-B-T5 additionally features anti-sulfur coating for enhanced environmental resistance. Both maintain ±0.1% tolerance, ±25ppm/°C temperature coefficient, and 0.125W power rating.

Supply Chain Continuity: All substitute parts maintain ROHS3 compliance and MSL Level 1 rating. Selection should account for inventory availability and lead time requirements specific to your supply chain.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07232RL directly replace RT0805FRE07232RL?

A: Yes. Both parts share identical resistance (232 Ohms), package (0805), power rating (0.125W), and operating temperature range (-55°C to 155°C). RT0805BRD07232RL offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C).

Q: What is the difference between 0.125W and 0.25W power ratings in the same package?

A: Power rating indicates maximum continuous power dissipation. The 5-2176091-8 (0.25W) can safely dissipate twice the power of the 0.125W parts within the same 0805 package dimensions. Selection depends on circuit current and voltage requirements.

Q: Are automotive-grade parts (AEC-Q200) required for non-automotive applications?

A: No. AEC-Q200 certification is not required for standard industrial or consumer applications. However, these parts are fully compatible and may be selected for enhanced reliability specifications or supply availability.

Q: Does tolerance affect PCB layout or assembly processes?

A: No. All listed parts use identical 0805 (2012 Metric) package dimensions and termination specifications. PCB footprints and assembly processes remain unchanged regardless of tolerance grade.

Q: What does MSL Level 1 (Unlimited) mean for storage and handling?

A: MSL Level 1 indicates the part has unlimited shelf life and requires no special moisture control during storage or handling. Standard ESD precautions apply to all thin film chip resistors.