Equivalent & Substitute Parts for RT0805FRE07232KL

Part Overview

The RT0805FRE07232KL is a 232 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package form factor, and electrical performance parameters while accommodating variations in tolerance, power rating, and temperature coefficient specifications.

Substiute Parts

RT0805FRE07232KL

YAGEOIn Stock: 941RT0805FRE07232KL Datasheet

Current PartRFQ

RT0805BRD07232KL

YAGEOIn Stock: 15802RT0805BRD07232KL Datasheet

UpgradeRFQ

2-2176094-8

TE Connectivity Passive ProductIn Stock: 18572-2176094-8 Datasheet

DirectRFQ

ERA-6AEB2323V

Panasonic Electronic ComponentsIn Stock: 4603ERA-6AEB2323V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Matching Parameters:

• Resistance value: 232 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)

Allowable Variations:

• Tolerance: May be equal to or tighter than ±1% (±0.1% acceptable)
• Power Rating: May be equal to or greater than 0.125W (0.25W acceptable)
• Temperature Coefficient: May be equal to or lower than ±50ppm/°C (±25ppm/°C acceptable)
• Manufacturer: Different manufacturers permitted
• Features: Additional certifications (AEC-Q200) permitted

Identified Substitutes:

1. RT0805BRD07232KL (YAGEO) – Upgrade with tighter tolerance and lower temperature coefficient
2. 2-2176094-8 (TE Connectivity) – Higher power rating variant
3. ERA-6AEB2323V (Panasonic) – Automotive-qualified variant with tighter tolerance

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD07232KL (YAGEO): Direct upgrade from the same manufacturer with improved tolerance specification (±0.1% vs ±1%) and reduced temperature coefficient (±25ppm/°C vs ±50ppm/°C). Maintains identical power rating and package specifications. Suitable for applications requiring higher precision without design modification.

2-2176094-8 (TE Connectivity): Provides increased power dissipation capability (0.25W vs 0.125W) while maintaining all other electrical parameters. Appropriate for circuits where thermal margin or power budget requires higher rating. Slight increase in seated height (0.026" vs 0.024") must be verified against PCB layout constraints.

ERA-6AEB2323V (Panasonic): Automotive-qualified component meeting AEC-Q200 standard with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Suitable for automotive and high-reliability applications. All other specifications remain compatible with the original part.

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and active product status. Selection should be based on application requirements for tolerance, power dissipation, and environmental qualification.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07232KL be used as a direct replacement for RT0805FRE07232KL?

A: Yes. Both parts share identical resistance value, package form factor, power rating, and operating temperature range. The substitute offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it functionally superior for the same application.

Q: What is the key difference between 2-2176094-8 and the other substitutes?

A: The 2-2176094-8 is rated for 0.25W power dissipation compared to 0.125W for other parts. This higher power rating is the primary distinguishing feature. Seated height increases from 0.024" to 0.026", which must be confirmed compatible with PCB design.

Q: Is ERA-6AEB2323V suitable for non-automotive applications?

A: Yes. The AEC-Q200 automotive qualification is an additional feature that does not restrict use in non-automotive circuits. All electrical and mechanical parameters remain compatible with the original RT0805FRE07232KL specification.

Q: Do all substitute parts have the same package dimensions?

A: All parts use the 0805 (2012 Metric) package with identical length (0.079") and width (0.049"). Seated height varies slightly: RT0805FRE07232KL and RT0805BRD07232KL and ERA-6AEB2323V are 0.024" maximum, while 2-2176094-8 is 0.026" maximum. PCB clearance must accommodate the highest value.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitutes maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental compliance profile.