RT0805FRE07215RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07215RL is a 215 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is currently active in production and ROHS3 compliant. Equivalent and substitute parts are identified when design requirements demand improved tolerance specifications, enhanced automotive qualification, or alternative sourcing for supply chain optimization.

Substiute Parts

RT0805FRE07215RL

YAGEOIn Stock: 1111RT0805FRE07215RL Datasheet

Current PartRFQ

5-2176091-5

TE Connectivity Passive ProductIn Stock: 19425-2176091-5 Datasheet

DirectRFQ

ERA-6AEB2150V

Panasonic Electronic ComponentsIn Stock: 4709ERA-6AEB2150V Datasheet

UpgradeRFQ

RG2012P-2150-B-T5

SusumuIn Stock: 5919RG2012P-2150-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

• Resistance Value: Must be 215 Ohms
• Package Type: Must be 0805 (2012 Metric)
• Composition: Must be Thin Film
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Termination Count: Must be 2 terminations
• RoHS Compliance: Must be ROHS3 compliant

Tolerance, power rating, and temperature coefficient may vary within acceptable ranges for equivalent substitution. Enhanced specifications (lower tolerance, higher power rating, lower temperature coefficient) represent upgrades. Automotive AEC-Q200 qualification and anti-sulfur features are optional enhancements that do not restrict substitution but indicate suitability for demanding applications.

Parameter Comparison

Engineering Selection Recommendations

All four parts are active products with ROHS3 compliance and identical resistance values in the 0805 package. Selection between these parts depends on application-specific requirements:

RT0805FRE07215RL (YAGEO) is the baseline specification with standard ±1% tolerance and ±50ppm/°C temperature coefficient. This part is suitable for general-purpose applications where tolerance and temperature stability requirements are moderate.

5-2176091-5 (TE Connectivity) provides improved tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C) with increased power rating (0.25W). The higher seated height (0.026") may require PCB layout consideration. This part is appropriate for precision analog circuits where tighter tolerance is beneficial.

ERA-6AEB2150V (Panasonic) combines ±0.1% tolerance with AEC-Q200 automotive qualification. This part maintains the original 0.125W power rating and 0.024" seated height. Selection of this part is indicated for automotive applications or systems requiring automotive-grade component reliability.

RG2012P-2150-B-T5 (Susumu) provides ±0.1% tolerance, AEC-Q200 qualification, and anti-sulfur protection with the lowest seated height (0.020"). This part is optimal for automotive applications in corrosive environments or high-reliability systems where sulfur resistance is specified.

Frequently Asked Questions (FAQ)

Q: Can RT0805FRE07215RL be replaced with 5-2176091-5?

A: Yes. Both parts share identical resistance, package, and operating temperature range. The TE Connectivity part offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C). The seated height increases from 0.024" to 0.026", which may affect PCB clearance in space-constrained layouts.

Q: What is the difference between ERA-6AEB2150V and RG2012P-2150-B-T5?

A: Both parts provide ±0.1% tolerance and AEC-Q200 automotive qualification. The Susumu part (RG2012P-2150-B-T5) includes anti-sulfur protection and has a lower seated height (0.020" vs 0.024"). The Panasonic part (ERA-6AEB2150V) is suitable for standard automotive applications without sulfur exposure concerns.

Q: Are all substitute parts suitable for automotive applications?

A: The original RT0805FRE07215RL does not carry AEC-Q200 qualification. ERA-6AEB2150V and RG2012P-2150-B-T5 both include AEC-Q200 automotive qualification. For automotive applications, selection of ERA-6AEB2150V or RG2012P-2150-B-T5 is recommended.

Q: Does package size differ between these parts?

A: All parts use the 0805 (2012 Metric) package with identical length (0.079") and width (0.049"). Seated height varies: RT0805FRE07215RL and ERA-6AEB2150V are 0.024", 5-2176091-5 is 0.026", and RG2012P-2150-B-T5 is 0.020". PCB layout must accommodate these height variations.

Q: Can RT0805FRE07215RL be used in place of ERA-6AEB2150V?

A: Electrical substitution is possible due to identical resistance, tolerance compatibility, and operating temperature range. However, the original part lacks AEC-Q200 automotive qualification. Use of RT0805FRE07215RL in automotive applications is not recommended unless automotive qualification is not a design requirement.