RT0805FRE07210RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07210RL is a 210 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package format, rated at 0.125W (1/8W) power dissipation. This surface mount device is manufactured by YAGEO and is currently in active production status. The part is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1), making it suitable for standard industrial and commercial applications operating across -55°C to 155°C temperature range.

Equivalent and substitute parts are identified to address component availability, performance upgrades, or specific application requirements such as enhanced tolerance specifications or automotive-grade certifications.

Substiute Parts

RT0805FRE07210RL

YAGEOIn Stock: 981RT0805FRE07210RL Datasheet

Current PartRFQ

RT0805BRD07210RL

YAGEOIn Stock: 10384RT0805BRD07210RL Datasheet

UpgradeRFQ

5-2176091-4

TE Connectivity Passive ProductIn Stock: 27095-2176091-4 Datasheet

DirectRFQ

ERA-6AEB2100V

Panasonic Electronic ComponentsIn Stock: 2583ERA-6AEB2100V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07210RL is determined by the following mandatory parameters:

• Resistance value: 210 Ohms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)
• Moisture Sensitivity Level: 1 (Unlimited) (minimum requirement)

Substitute parts may vary in tolerance specification, temperature coefficient, and power rating, provided these variations do not reduce the functional capability of the circuit. Enhanced specifications (lower tolerance, lower temperature coefficient, higher power rating) represent direct upgrades.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active production status and ROHS3 compliance, ensuring long-term availability and regulatory conformance.

RT0805BRD07210RL represents a direct upgrade from the main part, offering improved tolerance (±0.1% versus ±1%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical power rating and package specifications.

5-2176091-4 (TE Connectivity) provides enhanced power dissipation capability (0.25W versus 0.125W) with improved tolerance and temperature coefficient specifications. The increased power rating accommodates higher current applications within the same physical package footprint.

ERA-6AEB2100V (Panasonic) delivers automotive-grade qualification (AEC-Q200) with improved tolerance and temperature coefficient performance. This part is suitable for applications requiring automotive-level reliability and environmental stress screening.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07210RL replace RT0805FRE07210RL in all applications?

A: Yes. RT0805BRD07210RL maintains identical resistance value, package format, power rating, and operating temperature range. The improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) represent performance enhancements with no functional limitations.

Q: What is the primary difference between 5-2176091-4 and the main part?

A: The 5-2176091-4 features doubled power rating (0.25W versus 0.125W) while maintaining the same 0805 package dimensions. This allows operation at higher current levels. Tolerance and temperature coefficient are also improved.

Q: Is ERA-6AEB2100V suitable for non-automotive applications?

A: Yes. ERA-6AEB2100V meets all electrical and mechanical requirements for standard industrial applications. The AEC-Q200 automotive qualification represents an additional certification that does not restrict use in non-automotive circuits.

Q: Are all substitute parts available in Tape & Reel (TR) packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging format, consistent with the main part specification.

Q: Do substitute parts require PCB layout modifications?

A: No. All substitute parts use identical 0805 (2012 Metric) package specifications with matching footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). No PCB redesign is required.

Q: What is the moisture sensitivity level for all parts?

A: All parts, including the main part and substitutes, carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.