RT0805FRE071K69L Equivalent & Substitute Parts

Part Overview

The RT0805FRE071K69L is a 1.69 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO, this component is actively produced and ROHS3 compliant. Substitute parts are identified to address inventory availability, enhanced tolerance specifications, increased power ratings, or automotive-grade certifications while maintaining electrical and mechanical compatibility within the 0805 package form factor.

Substiute Parts

RT0805FRE071K69L

YAGEOIn Stock: 713RT0805FRE071K69L Datasheet

Current PartRFQ

RT0805BRD071K69L

YAGEOIn Stock: 6037RT0805BRD071K69L Datasheet

UpgradeRFQ

3-2176092-7

TE Connectivity Passive ProductIn Stock: 21883-2176092-7 Datasheet

DirectRFQ

ERA-6AEB1691V

Panasonic Electronic ComponentsIn Stock: 18683ERA-6AEB1691V Datasheet

UpgradeRFQ

RG2012P-1691-B-T5

SusumuIn Stock: 7530RG2012P-1691-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 1.69 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)

Allowable Variations:

• Tolerance: May be equal to or tighter than ±1%
• Power Rating: May be equal to or greater than 0.125W
• Temperature Coefficient: May be equal to or tighter than ±50ppm/°C
• Certifications: May include additional automotive or environmental ratings

All identified substitute parts meet these criteria and are electrically and mechanically interchangeable with the RT0805FRE071K69L in standard applications.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD071K69L (YAGEO): Direct upgrade within the same manufacturer series. Offers tighter tolerance (±0.1% vs ±1%) and improved temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating and package specifications. Suitable for applications requiring enhanced precision without changing supplier.

3-2176092-7 (TE Connectivity): Provides increased power dissipation capability (0.25W vs 0.125W) in the same 0805 package footprint. Maintains ±0.1% tolerance and ±25ppm/°C temperature coefficient. Appropriate for circuits with higher thermal demands or design margin requirements.

ERA-6AEB1691V (Panasonic): Automotive-grade component certified to AEC-Q200 standard. Delivers ±0.1% tolerance and ±25ppm/°C temperature coefficient. Suitable for automotive applications or systems requiring automotive-qualified components.

RG2012P-1691-B-T5 (Susumi): Automotive-grade component with AEC-Q200 certification and anti-sulfur coating. Offers ±0.1% tolerance, ±25ppm/°C temperature coefficient, and the lowest seated height (0.020" vs 0.024"). Appropriate for automotive applications with corrosive environment exposure or high-density PCB layouts.

All substitute parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD071K69L replace RT0805FRE071K69L in any application?

A: Yes. RT0805BRD071K69L is electrically and mechanically compatible. It provides superior tolerance (±0.1% vs ±1%) and temperature coefficient performance (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating, package, and operating temperature range.

Q: What is the primary advantage of 3-2176092-7 over the main part?

A: The 3-2176092-7 offers double the power rating (0.25W vs 0.125W) in the same 0805 package footprint. This provides additional thermal margin for applications operating near the power dissipation limit of the original specification.

Q: Are ERA-6AEB1691V and RG2012P-1691-B-T5 suitable for non-automotive applications?

A: Yes. Both parts exceed the electrical and mechanical requirements of the RT0805FRE071K69L and are fully compatible with standard industrial and commercial applications. Automotive certification does not restrict use in other applications.

Q: What is the difference between ERA-6AEB1691V and RG2012P-1691-B-T5?

A: Both are automotive-grade (AEC-Q200) with identical electrical specifications. RG2012P-1691-B-T5 includes anti-sulfur coating and has a lower seated height (0.020" vs 0.024"), making it preferable for high-density PCB designs or environments with sulfur exposure.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes. All parts, including the main component, are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. All parts share identical 0805 (2012 Metric) package specifications and footprints. Physical dimensions and termination counts are compatible, allowing direct substitution without PCB redesign.