RT0805FRE07196KL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07196KL is a 196 kOhms ±1% thin film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format with 0.125W power rating. This component is actively produced and widely used in general-purpose electronic applications requiring precision resistive elements. Substitute parts become necessary when the primary part experiences supply constraints, when design requirements demand enhanced tolerance specifications, or when automotive-grade reliability certifications are required for specific applications.

Substiute Parts

RT0805FRE07196KL

YAGEOIn Stock: 1078RT0805FRE07196KL Datasheet

Current PartRFQ

2-2176094-2

TE Connectivity Passive ProductIn Stock: 18272-2176094-2 Datasheet

DirectRFQ

ERA-6AEB1963V

Panasonic Electronic ComponentsIn Stock: 10262ERA-6AEB1963V Datasheet

UpgradeRFQ

RG2012P-1963-B-T5

SusumuIn Stock: 25623RG2012P-1963-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07196KL is determined by the following mandatory parameters:

• Resistance Value: Must be 196 kOhms (exact match required)
• Package Format: Must be 0805 (2012 Metric) for mechanical and electrical compatibility
• Composition: Thin film construction maintains performance characteristics
• Operating Temperature Range: Must support -55°C to 155°C minimum
• RoHS Compliance: ROHS3 Compliant status required

The substitute parts listed below meet all mandatory parameters. Tolerance specifications may be tighter (±0.1% vs ±1%), and power ratings may be equal or higher (0.125W or 0.25W). Temperature coefficient values may be lower (±25ppm/°C vs ±50ppm/°C), representing improved stability. Automotive AEC-Q200 certification is an additional qualification available in certain substitutes but not required for general-purpose applications.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitution (2-2176094-2 by TE Connectivity Passive Product)

The 2-2176094-2 provides direct electrical substitution with improved tolerance (±0.1%) and higher power dissipation capability (0.25W). This part is suitable for applications where the original RT0805FRE07196KL experiences supply unavailability. The increased power rating provides additional thermal margin without affecting circuit performance. ROHS3 compliance and MSL 1 rating match the original specification.

Upgrade Substitution with Automotive Qualification (ERA-6AEB1963V by Panasonic Electronic Components)

The ERA-6AEB1963V offers AEC-Q200 automotive qualification with ±0.1% tolerance and ±25ppm/°C temperature coefficient. This part is suitable for applications requiring automotive-grade reliability or when enhanced temperature stability is beneficial. Electrical and mechanical parameters remain compatible with the original design.

Upgrade Substitution with Anti-Sulfur Feature (RG2012P-1963-B-T5 by Susumu)

The RG2012P-1963-B-T5 combines AEC-Q200 automotive qualification with anti-sulfur construction and ±0.1% tolerance. This part is suitable for harsh environmental applications or when extended component longevity in corrosive atmospheres is required. The anti-sulfur feature and lower temperature coefficient (±25ppm/°C) represent performance enhancements over the original specification.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with ±0.1% tolerance in place of the ±1% original?

A: Yes. Tighter tolerance specifications are electrically compatible and represent an improvement in precision. The circuit will function correctly with the substitute part.

Q: What is the difference between the power ratings (0.125W vs 0.25W)?

A: Power rating indicates maximum continuous power dissipation capability. A 0.25W part can safely dissipate more heat than a 0.125W part. Using a higher-rated part does not affect circuit operation and provides additional thermal margin.

Q: Are the automotive-qualified parts (ERA-6AEB1963V and RG2012P-1963-B-T5) suitable for non-automotive applications?

A: Yes. Automotive-qualified parts meet all general-purpose application requirements and exceed standard specifications. They are fully compatible with non-automotive designs.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive industry standard qualification for passive components. It certifies that the part meets automotive reliability and performance requirements including temperature cycling, humidity resistance, and failure rate specifications.

Q: Can I mix different substitute parts in the same circuit?

A: Yes. All listed substitutes are electrically and mechanically compatible with each other and with the original RT0805FRE07196KL. They can be used interchangeably in the same design.

Q: What does anti-sulfur construction mean?

A: Anti-sulfur construction protects the component from corrosion caused by hydrogen sulfide exposure in industrial or harsh environments. This feature extends component lifespan in corrosive atmospheres.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All substitute parts are supplied in Tape & Reel (TR) packaging in 0805 (2012 Metric) format, matching the original component's package specifications.