RT0805FRE07174KL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07174KL is a 174 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package form factor, and electrical performance within acceptable tolerance and power rating parameters.

Substiute Parts

RT0805FRE07174KL

YAGEOIn Stock: 801RT0805FRE07174KL Datasheet

Current PartRFQ

RT0805BRD07174KL

YAGEOIn Stock: 4625RT0805BRD07174KL Datasheet

UpgradeRFQ

1-2176094-7

TE Connectivity Passive ProductIn Stock: 17321-2176094-7 Datasheet

DirectRFQ

ERA-6AEB1743V

Panasonic Electronic ComponentsIn Stock: 3498ERA-6AEB1743V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent and substitute parts for the RT0805FRE07174KL are selected based on the following criteria:

• Resistance Value: All substitutes maintain 174 kOhms nominal resistance
• Package Compatibility: All substitutes use 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W)
• Composition: All substitutes are thin film resistors
• Tolerance: Substitutes may offer equal or tighter tolerance (±1% or ±0.1%)
• Power Rating: Substitutes rated at 0.125W (1/8W) or higher
• Temperature Range: All substitutes operate within -55°C ~ 155°C
• Termination: All substitutes have 2 terminations

Substitutes are grouped by tolerance grade and manufacturer certification status.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD07174KL (YAGEO): Direct upgrade from RT0805FRE07174KL. Identical package and power rating with improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C). ROHS3 compliant. Recommended for applications requiring tighter tolerance specifications.

ERA-6AEB1743V (Panasonic): Equivalent tolerance and power rating to RT0805BRD07174KL with automotive AEC-Q200 certification. ROHS3 compliant. Suitable for automotive and high-reliability applications requiring AEC-Q200 qualification.

1-2176094-7 (TE Connectivity): Higher power rating (0.25W vs 0.125W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Seated height 0.026" (0.65mm) versus 0.024" (0.60mm) for other substitutes. RoHS non-compliant. Acceptable for applications with relaxed RoHS requirements and higher power dissipation margins.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07174KL replace RT0805FRE07174KL directly?

A: Yes. Both parts share identical 0805 package dimensions, 174 kOhms resistance, 0.125W power rating, and -55°C ~ 155°C operating temperature range. RT0805BRD07174KL offers superior tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C).

Q: Is ERA-6AEB1743V suitable for non-automotive applications?

A: Yes. ERA-6AEB1743V meets all electrical and mechanical requirements of the main part. AEC-Q200 certification indicates automotive-grade reliability and is acceptable for general industrial and consumer applications.

Q: What is the impact of the 0.026" seated height of 1-2176094-7?

A: The 0.002" (0.05mm) height difference is within typical PCB assembly tolerances. Verify clearance in your specific board design if height-constrained applications are present.

Q: Can I use 1-2176094-7 in a RoHS-compliant assembly?

A: No. 1-2176094-7 is RoHS non-compliant. Use RT0805BRD07174KL or ERA-6AEB1743V for RoHS3-compliant assemblies.

Q: Are all substitutes available in Tape & Reel packaging?

A: Yes. All listed substitutes are supplied in Tape & Reel (TR) packaging suitable for automated assembly.