RT0805FRE0716RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE0716RL is a 16 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package format, rated for 0.125W (1/8W) power dissipation. This YAGEO component operates across -55°C to 155°C and maintains ROHS3 compliance with unlimited moisture sensitivity rating (MSL 1). The part is currently active in production with 994 units in stock. Equivalent and substitute parts are identified based on matching resistance value, package format, power rating, and operating temperature range while allowing for tolerance and temperature coefficient variations within acceptable engineering parameters.

Substiute Parts

RT0805FRE0716RL

YAGEOIn Stock: 1049RT0805FRE0716RL Datasheet

Current PartRFQ

RT0805BRD0716RL

YAGEOIn Stock: 14979RT0805BRD0716RL Datasheet

UpgradeRFQ

RT0805DRE0716RL

YAGEOIn Stock: 2146RT0805DRE0716RL Datasheet

UpgradeRFQ

RG2012Q-160-D-T5

SusumuIn Stock: 6046RG2012Q-160-D-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE0716RL is determined by the following mandatory parameters:

• Resistance Value: Must be 16 Ohms
• Package Format: Must be 0805 (2012 Metric)
• Power Rating: Must be 0.125W (1/8W) minimum
• Composition: Must be Thin Film
• Operating Temperature Range: Must support -55°C to 155°C
• Compliance: Must maintain ROHS3 compliance

Tolerance and temperature coefficient may vary within acceptable engineering limits. All identified substitutes meet these core requirements and are therefore electrically and mechanically compatible with the original part.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active production components with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), ensuring compatibility with the original RT0805FRE0716RL in standard applications.

RT0805BRD0716RL offers improved tolerance specification (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), making it suitable for applications requiring tighter resistance accuracy and enhanced temperature stability.

RT0805DRE0716RL provides intermediate tolerance (±0.5%) while maintaining the original temperature coefficient (±50ppm/°C), offering a balance between cost and performance.

RG2012Q-160-D-T5 from Susumu includes automotive-grade qualification (AEC-Q200) and anti-sulfur features, with a slightly reduced maximum seated height (0.020" versus 0.024"), making it appropriate for automotive and harsh environment applications where additional reliability certifications are required.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0716RL replace RT0805FRE0716RL in any application?

A: Yes. RT0805BRD0716RL is electrically and mechanically compatible. It provides superior tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C), making it suitable for all applications where the original part is used. The improved specifications do not create incompatibility.

Q: What is the primary difference between RT0805DRE0716RL and RG2012Q-160-D-T5?

A: Both parts share identical electrical specifications (16 Ohms ±0.5%, ±50ppm/°C). The RG2012Q-160-D-T5 includes automotive AEC-Q200 qualification and anti-sulfur features, with a slightly lower maximum seated height (0.020" versus 0.024"). Selection depends on application requirements for automotive certification and environmental protection.

Q: Are all substitute parts available in Tape & Reel (TR) packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel packaging, maintaining consistency with the original RT0805FRE0716RL packaging format.

Q: Does the height difference in RG2012Q-160-D-T5 affect PCB compatibility?

A: The RG2012Q-160-D-T5 has a maximum seated height of 0.020" (0.50mm) compared to 0.024" (0.60mm) for other parts. This lower profile is compatible with standard 0805 footprints and does not create assembly or clearance issues.

Q: Which substitute part should be selected for cost optimization?

A: RT0805DRE0716RL offers the most cost-effective substitute while maintaining full electrical compatibility and identical temperature coefficient performance to the original part.