RT0805FRE0716R9L Equivalent & Substitute Parts

Part Overview

The RT0805FRE0716R9L is a 16.9 Ohm ±1% thin film chip resistor manufactured by YAGEO in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and operates across the temperature range of -55°C to 155°C. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications and mechanical compatibility can be maintained within the same package footprint and operating parameters.

Substiute Parts

RT0805FRE0716R9L

YAGEOIn Stock: 932RT0805FRE0716R9L Datasheet

Current PartRFQ

4-1625868-9

TE Connectivity Passive ProductIn Stock: 18084-1625868-9 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE0716R9L is determined by the following critical parameters:

• Resistance Value: Must be 16.9 Ohms
• Package Format: Must be 0805 (2012 Metric) to ensure PCB footprint compatibility
• Composition: Thin film construction maintains performance characteristics
• Operating Temperature Range: Must support -55°C to 155°C minimum
• RoHS3 Compliance: Required for regulatory alignment
• Moisture Sensitivity Level: MSL 1 rating ensures handling compatibility

The substitute part 4-1625868-9 (TE Connectivity Passive Product) meets all critical substitution criteria. While this part offers enhanced specifications in tolerance (±0.1% vs ±1%) and power rating (0.25W vs 0.125W), it maintains full compatibility with the original part's mechanical and environmental requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the RT0805FRE0716R9L and 4-1625868-9 maintain Active product status with full RoHS3 compliance and identical moisture sensitivity ratings. The substitute part 4-1625868-9 provides enhanced performance specifications across tolerance, power dissipation capability, and temperature coefficient stability while maintaining identical mechanical footprint and environmental operating range. Selection between these parts should be based on application-specific requirements for tolerance precision and thermal dissipation capacity. Both components are suitable for direct substitution in 0805 package applications requiring 16.9 Ohm thin film resistors.

Frequently Asked Questions (FAQ)

Q: Can the 4-1625868-9 be used as a direct replacement for the RT0805FRE0716R9L?

A: Yes. Both parts share identical resistance value (16.9 Ohms), package format (0805), composition (thin film), operating temperature range (-55°C to 155°C), and compliance certifications (RoHS3, MSL 1). The substitute part exceeds the original specifications in tolerance and power rating while maintaining full mechanical and environmental compatibility.

Q: What are the key differences between these two parts?

A: The primary differences are tolerance (±0.1% vs ±1%), power rating (0.25W vs 0.125W), and temperature coefficient (±25ppm/°C vs ±50ppm/°C). The substitute part offers superior performance in all three parameters. Maximum seated height differs by 0.002" (0.05mm), which remains within typical PCB assembly tolerances.

Q: Are there any package compatibility concerns?

A: No. Both parts use the identical 0805 (2012 Metric) package with matching footprint dimensions of 0.079" L x 1.25mm W (2.00mm x 1.25mm). The 0.002" height difference is negligible for standard PCB assembly processes.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the RT0805FRE0716R9L and 4-1625868-9 are RoHS3 compliant with MSL 1 (unlimited) moisture sensitivity rating. Both carry EAR99 ECCN classification and identical HTSUS codes (8533.21.0030).

Q: Which part should be selected for high-precision applications?

A: The 4-1625868-9 offers superior tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C), making it suitable for applications requiring tighter resistance accuracy and improved thermal stability.