RT0805FRE0716R5L Equivalent & Substitute Parts

Part Overview

The RT0805FRE0716R5L is a 16.5 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in precision analog circuits, signal conditioning, and measurement applications where stable resistance values and low temperature coefficients are required. Finding equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and optimize cost-performance trade-offs across different manufacturing sources.

Substiute Parts

RT0805FRE0716R5L

YAGEOIn Stock: 1197RT0805FRE0716R5L Datasheet

Current PartRFQ

4-1625868-8

TE Connectivity Passive ProductIn Stock: 30874-1625868-8 Datasheet

DirectRFQ

ERA-6AHD16R5V

Panasonic Electronic ComponentsIn Stock: 23864ERA-6AHD16R5V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE0716R5L is determined by the following core parameters:

• Resistance Value: Must be 16.5 Ohms
• Package / Case: Must be 0805 (2012 Metric)
• Composition: Must be Thin Film
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• RoHS Compliance: Must meet ROHS3 Compliant status
• Moisture Sensitivity Level: Must be MSL 1 or equivalent

Tolerance, power rating, and temperature coefficient may vary within acceptable engineering limits for specific applications. The substitute parts listed below meet all core substitution criteria while offering different performance characteristics in tolerance and power handling.

Parameter Comparison

Engineering Selection Recommendations

4-1625868-8 (TE Connectivity Passive Product)

This substitute offers superior tolerance (±0.1% vs ±1%) and higher power dissipation capability (0.25W vs 0.125W) while maintaining the same package footprint. The lower temperature coefficient (±25ppm/°C) provides enhanced stability across temperature extremes. This part is suitable for applications requiring tighter resistance tolerances and greater thermal headroom. ROHS3 compliance and MSL 1 rating ensure environmental and moisture handling compatibility.

ERA-6AHD16R5V (Panasonic Electronic Components)

This substitute maintains identical power rating (0.125W) and temperature coefficient (±50ppm/°C) as the original part while offering improved tolerance (±0.5% vs ±1%). The ERA-6AHD series carries AEC-Q200 automotive qualification, making it suitable for automotive and high-reliability applications. Physical dimensions and height are equivalent to the original part. ROHS3 compliance and MSL 1 rating ensure full environmental compatibility.

Frequently Asked Questions (FAQ)

Q: Can 4-1625868-8 be used as a direct replacement for RT0805FRE0716R5L?

A: Yes. Both parts share identical resistance value (16.5 Ohms), package (0805), composition (thin film), and operating temperature range (-55°C ~ 155°C). The 4-1625868-8 offers tighter tolerance and higher power rating, making it a functional upgrade. Height difference (0.026" vs 0.024") is within typical PCB assembly tolerances.

Q: What is the difference between ERA-6AHD16R5V and the original RT0805FRE0716R5L?

A: Both parts are electrically and mechanically equivalent with identical resistance, package, power rating, and temperature coefficient. The ERA-6AHD16R5V offers improved tolerance (±0.5% vs ±1%) and includes AEC-Q200 automotive qualification. Physical dimensions and height are identical.

Q: Are all three parts interchangeable on the same PCB?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical footprints and compatible height specifications. They share the same operating temperature range, RoHS compliance status, and moisture sensitivity level.

Q: Which substitute should I choose for cost optimization?

A: Selection depends on application requirements. The RT0805FRE0716R5L offers baseline performance at standard cost. The 4-1625868-8 provides enhanced tolerance and power handling for precision circuits. The ERA-6AHD16R5V is optimal for automotive applications requiring AEC-Q200 qualification.

Q: Do these parts require different soldering or assembly processes?

A: No. All three parts are thin film 0805 chip resistors with identical package specifications and MSL 1 ratings. Standard SMD assembly processes apply to all variants.