RT0805FRE07130RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07130RL is a 130 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO, this component is actively produced and widely stocked. Substitute parts are identified to address supply chain requirements, enhanced tolerance specifications, or application-specific certifications while maintaining electrical and mechanical compatibility.

Substiute Parts

RT0805FRE07130RL

YAGEOIn Stock: 5345RT0805FRE07130RL Datasheet

Current PartRFQ

RT0805BRD07130RL

YAGEOIn Stock: 10640RT0805BRD07130RL Datasheet

UpgradeRFQ

3-2176091-5

TE Connectivity Passive ProductIn Stock: 30943-2176091-5 Datasheet

DirectRFQ

ERA-6AEB131V

Panasonic Electronic ComponentsIn Stock: 21579ERA-6AEB131V Datasheet

UpgradeRFQ

RG2012P-131-B-T5

SusumuIn Stock: 5999RG2012P-131-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

• Identical resistance value: 130 Ohms
• Package compatibility: 0805 (2012 Metric) form factor
• Composition: Thin film construction
• Operating temperature range: -55°C ~ 155°C minimum
• RoHS3 compliance and MSL Level 1 rating

Tolerance and power rating may vary within acceptable limits. Tolerance upgrades (from ±1% to ±0.1%) and power rating increases (from 0.125W to 0.25W) are acceptable substitutions. Temperature coefficient improvements and automotive certifications (AEC-Q200) represent enhanced specifications suitable for demanding applications.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and ROHS3 compliance. Selection between substitutes depends on application-specific requirements:

RT0805BRD07130RL offers tolerance improvement to ±0.1% and reduced temperature coefficient (±25ppm/°C) while maintaining identical power rating and package dimensions as the primary part.

3-2176091-5 provides increased power dissipation capability (0.25W) with enhanced tolerance and temperature coefficient specifications. Height increase to 0.026" (0.65mm) requires clearance verification in space-constrained layouts.

ERA-6AEB131V includes AEC-Q200 automotive qualification with ±0.1% tolerance and ±25ppm/°C temperature coefficient, suitable for automotive and high-reliability applications.

RG2012P-131-B-T5 combines AEC-Q200 automotive qualification with anti-sulfur construction, ±0.1% tolerance, and the lowest seated height (0.020" / 0.50mm) among substitutes, optimized for compact assemblies.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07130RL directly replace RT0805FRE07130RL?

A: Yes. Both parts share identical resistance, power rating, package, and operating temperature range. RT0805BRD07130RL provides superior tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C).

Q: Is 3-2176091-5 suitable for applications requiring 0.125W power dissipation?

A: Yes. The 0.25W rating of 3-2176091-5 exceeds the 0.125W requirement, providing design margin. Verify PCB layout accommodates the 0.026" (0.65mm) seated height.

Q: What is the difference between ERA-6AEB131V and RG2012P-131-B-T5?

A: Both parts meet AEC-Q200 automotive standards with ±0.1% tolerance. RG2012P-131-B-T5 includes anti-sulfur construction and features a lower seated height (0.020" vs 0.024"), beneficial for high-density assemblies.

Q: Are all substitute parts available in Tape & Reel (TR) packaging?

A: Yes. All listed parts are supplied in Tape & Reel packaging suitable for automated assembly processes.

Q: Do substitute parts maintain the same moisture sensitivity level?

A: Yes. All parts are rated MSL Level 1 (Unlimited), indicating no moisture sensitivity restrictions.