RT0805FRE07118KL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07118KL is a 118 kOhms ±1% thin film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The component is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. As an active product with 943 units in stock, equivalent and substitute parts may be required for design flexibility, supply chain optimization, or performance enhancement in specific applications.

Substiute Parts

RT0805FRE07118KL

YAGEOIn Stock: 976RT0805FRE07118KL Datasheet

Current PartRFQ

2176094-2

TE Connectivity Passive ProductIn Stock: 9022176094-2 Datasheet

DirectRFQ

ERA-6AEB1183V

Panasonic Electronic ComponentsIn Stock: 10413ERA-6AEB1183V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07118KL is determined by the following critical parameters:

• Resistance Value: Must be 118 kOhms
• Package Format: Must be 0805 (2012 Metric) for mechanical and electrical compatibility
• Composition: Thin film construction required
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Termination Count: Must have 2 terminations
• RoHS Compliance: ROHS3 compliance required

Tolerance, power rating, and temperature coefficient may vary within acceptable engineering limits. Substitute parts identified below meet all mandatory substitution criteria while offering enhanced specifications in tolerance and temperature stability.

Parameter Comparison

Engineering Selection Recommendations

2176094-2 (TE Connectivity Passive Product)

This substitute offers improved tolerance specification (±0.1% versus ±1%) and enhanced temperature coefficient stability (±25ppm/°C versus ±50ppm/°C). The power rating is increased to 0.25W (1/4W), providing additional thermal margin. Physical dimensions remain compatible with 0805 package specifications, though seated height increases to 0.026" (0.65mm). ROHS3 compliance and MSL Level 1 rating are maintained. Selection of this part is appropriate for applications requiring tighter tolerance control and improved temperature stability within the same package footprint.

ERA-6AEB1183V (Panasonic Electronic Components)

This substitute provides the tightest tolerance specification (±0.1%) and lowest temperature coefficient (±25ppm/°C) among available options. The component carries AEC-Q200 automotive qualification, indicating enhanced reliability and quality assurance standards. Power rating matches the original specification at 0.125W (1/8W), and seated height remains at 0.024" (0.60mm). ROHS3 compliance and MSL Level 1 rating are maintained. Selection of this part is appropriate for applications requiring automotive-grade reliability, superior tolerance performance, and temperature stability while maintaining identical package dimensions and power characteristics.

Frequently Asked Questions (FAQ)

Q: Can 2176094-2 be used as a direct replacement for RT0805FRE07118KL?

A: Yes. Both components share identical resistance value (118 kOhms), package format (0805), composition (thin film), operating temperature range (-55°C to 155°C), and compliance certifications (ROHS3, MSL Level 1). The 2176094-2 offers superior tolerance (±0.1% versus ±1%) and temperature coefficient (±25ppm/°C versus ±50ppm/°C). The increased power rating (0.25W versus 0.125W) and marginal height increase (0.026" versus 0.024") do not prevent mechanical or electrical substitution in standard 0805 footprints.

Q: What are the advantages of ERA-6AEB1183V over the original RT0805FRE07118KL?

A: The ERA-6AEB1183V provides three key advantages: tighter tolerance specification (±0.1% versus ±1%), superior temperature coefficient (±25ppm/°C versus ±50ppm/°C), and AEC-Q200 automotive qualification. Physical dimensions and power rating remain identical, ensuring seamless mechanical compatibility. These enhancements are beneficial for precision analog circuits and automotive applications requiring enhanced reliability.

Q: Are all substitute parts compatible with the original 0805 PCB footprint?

A: Yes. All substitute parts conform to 0805 (2012 Metric) package specifications with identical length (0.079") and width (0.049"). The ERA-6AEB1183V maintains identical seated height (0.024"), while 2176094-2 has a marginal increase to 0.026" (0.65mm). This minor height variation does not affect standard 0805 footprint compatibility or assembly processes.

Q: Which substitute part should be selected for high-precision applications?

A: Both 2176094-2 and ERA-6AEB1183V offer ±0.1% tolerance and ±25ppm/°C temperature coefficient, meeting high-precision requirements. ERA-6AEB1183V is recommended for applications requiring automotive-grade reliability and AEC-Q200 qualification. 2176094-2 is appropriate for general high-precision applications where automotive qualification is not required.

Q: Are moisture sensitivity levels identical across all parts?

A: Yes. The RT0805FRE07118KL, 2176094-2, and ERA-6AEB1183V all carry MSL Level 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.