Equivalent & Substitute Parts for RT0805FRE07115RL

Part Overview

The RT0805FRE07115RL is a 115 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) operation. This YAGEO component is actively produced and ROHS3 compliant. Equivalent and substitute parts are identified based on matching resistance value, package form factor, and operating temperature range while allowing variations in tolerance, power rating, and temperature coefficient specifications.

Substiute Parts

RT0805FRE07115RL

YAGEOIn Stock: 771RT0805FRE07115RL Datasheet

Current PartRFQ

RT0805DRE07115RL

YAGEOIn Stock: 908RT0805DRE07115RL Datasheet

UpgradeRFQ

3-2176091-0

TE Connectivity Passive ProductIn Stock: 11603-2176091-0 Datasheet

DirectRFQ

ERA-6AEB1150V

Panasonic Electronic ComponentsIn Stock: 10802ERA-6AEB1150V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07115RL is determined by the following mandatory parameters:

• Resistance Value: Must be 115 Ohms
• Package Form Factor: Must be 0805 (2012 Metric)
• Composition: Must be Thin Film
• Operating Temperature Range: Must support -55°C ~ 155°C
• Number of Terminations: Must be 2

Tolerance, power rating, and temperature coefficient may vary within the substitute parts while maintaining functional equivalence. All identified substitutes meet these core requirements and are suitable for direct replacement in applications where the RT0805FRE07115RL is specified.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are actively produced and ROHS3 compliant, meeting the compliance requirements of the original RT0805FRE07115RL specification.

RT0805DRE07115RL (YAGEO): Tighter tolerance (±0.5% vs ±1%) with identical power rating and temperature coefficient. Same manufacturer as the primary part, ensuring consistent manufacturing standards and supply chain continuity.

3-2176091-0 (TE Connectivity): Higher power rating (0.25W vs 0.125W) and improved temperature coefficient (±25ppm/°C vs ±50ppm/°C). Tighter tolerance (±0.1%). Suitable for applications requiring enhanced thermal performance or stricter tolerance control.

ERA-6AEB1150V (Panasonic): Automotive AEC-Q200 rated component with tighter tolerance (±0.1%) and improved temperature coefficient (±25ppm/°C). Maintains original power rating (0.125W). Appropriate for automotive and high-reliability applications.

Frequently Asked Questions (FAQ)

Q: Can RT0805DRE07115RL replace RT0805FRE07115RL in all applications?

A: Yes. Both parts share identical package, resistance value, power rating, and operating temperature range. The tighter tolerance of RT0805DRE07115RL (±0.5% vs ±1%) provides improved accuracy without functional incompatibility.

Q: What is the advantage of using 3-2176091-0 over the original part?

A: The 3-2176091-0 offers higher power dissipation capability (0.25W vs 0.125W) and superior temperature stability (±25ppm/°C vs ±50ppm/°C). Use this part in applications where thermal margin or tighter tolerance is required.

Q: Is ERA-6AEB1150V suitable for non-automotive applications?

A: Yes. The AEC-Q200 automotive qualification is an additional certification that does not restrict use in non-automotive applications. The part meets all functional requirements of the original specification.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All parts are supplied in Tape & Reel (TR) packaging and use the 0805 (2012 Metric) form factor, ensuring compatibility with standard pick-and-place assembly equipment.

Q: What is the impact of different temperature coefficients on circuit performance?

A: Temperature coefficient determines resistance drift over the operating temperature range. The original part (±50ppm/°C) and substitute parts with ±25ppm/°C will exhibit different resistance values at temperature extremes. Select based on circuit tolerance requirements.