RT0805FRE07113RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07113RL is a 113 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. As an active product with established supply availability, equivalent and substitute parts are available from alternative manufacturers offering improved tolerance specifications or enhanced automotive qualification.

Substiute Parts

RT0805FRE07113RL

YAGEOIn Stock: 702RT0805FRE07113RL Datasheet

Current PartRFQ

2-2176091-9

TE Connectivity Passive ProductIn Stock: 25602-2176091-9 Datasheet

DirectRFQ

ERA-6AEB1130V

Panasonic Electronic ComponentsIn Stock: 6102ERA-6AEB1130V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07113RL is determined by the following critical parameters:

• Resistance Value: Must be 113 Ohms
• Package Type: Must be 0805 (2012 Metric) for mechanical and electrical compatibility
• Composition: Thin film construction maintains performance characteristics
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Termination Count: Must have 2 terminations for PCB footprint compatibility
• RoHS Compliance: ROHS3 compliance required for regulatory alignment

Tolerance, power rating, and temperature coefficient may vary within acceptable engineering parameters. Substitute parts with improved tolerance (±0.1% vs ±1%) or higher power ratings (0.25W vs 0.125W) are electrically compatible and represent performance upgrades. Automotive AEC-Q200 qualification is an additional feature available in certain substitutes.

Parameter Comparison

Engineering Selection Recommendations

RT0805FRE07113RL (YAGEO): Select this part for standard industrial applications where ±1% tolerance and ±50ppm/°C temperature coefficient meet circuit requirements. ROHS3 compliance and MSL Level 1 rating support standard manufacturing environments.

2-2176091-9 (TE Connectivity): This substitute offers improved tolerance (±0.1%) and reduced temperature coefficient (±25ppm/°C) with higher power rating (0.25W). Select when circuit design requires tighter resistance tolerance or higher thermal dissipation capacity. Height increase of 0.002" (0.05mm) must be verified against PCB clearance constraints. ROHS3 compliance maintained.

ERA-6AEB1130V (Panasonic): This substitute combines improved tolerance (±0.1%), reduced temperature coefficient (±25ppm/°C), and AEC-Q200 automotive qualification. Select for automotive applications, safety-critical circuits, or designs requiring enhanced reliability certification. Maintains original 0.125W power rating and 0.024" seated height. ROHS3 compliance and REACH Unaffected status confirmed.

Frequently Asked Questions (FAQ)

Q: Can 2-2176091-9 replace RT0805FRE07113RL in all applications?

A: Electrical substitution is valid. The 0.002" (0.05mm) height difference must be evaluated against PCB assembly clearances and solder reflow profiles. The higher power rating (0.25W vs 0.125W) provides thermal margin without affecting circuit function.

Q: Is ERA-6AEB1130V suitable for non-automotive applications?

A: Yes. AEC-Q200 qualification is an additional feature that does not restrict use in standard industrial or consumer applications. The improved tolerance and temperature coefficient provide performance benefits across all application categories.

Q: What is the impact of tolerance differences between ±1% and ±0.1%?

A: For a 113 Ohm resistor, ±1% tolerance allows 111.87 to 114.13 Ohm variation, while ±0.1% tolerance restricts variation to 112.887 to 113.113 Ohms. Select ±0.1% substitutes when circuit design requires tighter resistance accuracy for precision analog circuits, reference networks, or matched resistor pairs.

Q: Are all three parts pin-compatible?

A: Yes. All three parts share identical 0805 (2012 Metric) package footprint with 2 terminations. PCB layout compatibility is confirmed. Seated height variation (0.024" to 0.026") must be considered for applications with tight vertical clearance constraints.

Q: What compliance certifications apply to each part?

A: All three parts are ROHS3 compliant and carry MSL Level 1 (Unlimited) moisture sensitivity rating. ERA-6AEB1130V additionally carries AEC-Q200 automotive qualification and REACH Unaffected status. RT0805FRE07113RL and 2-2176091-9 have REACH Unaffected and Vendor Undefined status respectively.