RT0805FRE0710R7L Equivalent & Substitute Parts

Part Overview

The RT0805FRE0710R7L is a 10.7 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is rated for 0.125W (1/8W) power dissipation with a temperature coefficient of ±50ppm/°C and operates across -55°C to 155°C. The part is ROHS3 compliant, MSL 1 rated, and currently in active production status. Equivalent and substitute parts are identified for applications requiring alternative sourcing, higher tolerance specifications, or enhanced automotive qualification.

Substiute Parts

RT0805FRE0710R7L

YAGEOIn Stock: 970RT0805FRE0710R7L Datasheet

Current PartRFQ

3-1625868-0

TE Connectivity Passive ProductIn Stock: 21513-1625868-0 Datasheet

DirectRFQ

ERA-6AHD10R7V

Panasonic Electronic ComponentsIn Stock: 6108ERA-6AHD10R7V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE0710R7L is determined by the following critical parameters:

• Resistance value: 10.7 Ohms (exact match required)
• Package type: 0805 (2012 Metric) form factor
• Composition: Thin film construction
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance and MSL 1 rating

The identified substitute parts maintain these core specifications while offering variations in tolerance, power rating, temperature coefficient, and automotive qualification. All substitutes are mechanically and electrically compatible within the allowed parameter ranges for this product category.

Parameter Comparison

Engineering Selection Recommendations

3-1625868-0 (TE Connectivity RP73P Series): This substitute offers improved tolerance specification (±0.1% versus ±1%) and higher power rating (0.25W versus 0.125W). The lower temperature coefficient (±25ppm/°C) provides enhanced stability. Height clearance increases by 0.002" (0.05mm). ROHS3 compliant with MSL 1 rating. Suitable for applications requiring tighter tolerance control and thermal headroom.

ERA-6AHD10R7V (Panasonic ERA-6A Series): This substitute maintains the original tolerance (±0.5%) and power rating (0.125W) with identical temperature coefficient (±50ppm/°C). Distinguishing feature is AEC-Q200 automotive qualification, making this part suitable for automotive and high-reliability applications. ROHS3 compliant with MSL 1 rating. Physical dimensions and height match the original specification.

Frequently Asked Questions (FAQ)

Q: Can the 3-1625868-0 be used as a direct replacement for RT0805FRE0710R7L?

A: Yes. Both parts share identical resistance value (10.7 Ohms), package (0805), composition (thin film), and operating temperature range (-55°C to 155°C). The substitute offers superior tolerance (±0.1% vs ±1%) and higher power rating (0.25W vs 0.125W). Height increases by 0.002" (0.05mm), which must be verified against PCB layout constraints.

Q: What is the advantage of ERA-6AHD10R7V over the original part?

A: The ERA-6AHD10R7V provides AEC-Q200 automotive qualification while maintaining the original tolerance (±0.5%), power rating (0.125W), and temperature coefficient (±50ppm/°C). This qualification is required for automotive and safety-critical applications. Physical dimensions and height are identical to the original.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitutes—RT0805FRE0710R7L, 3-1625868-0, and ERA-6AHD10R7V—are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Does tolerance difference affect circuit performance?

A: Tolerance affects resistor value accuracy. The 3-1625868-0 (±0.1%) provides tighter tolerance than the original (±1%), resulting in more precise resistance values. The ERA-6AHD10R7V (±0.5%) offers intermediate tolerance. Selection depends on circuit requirements for resistance accuracy.

Q: Can these parts be used interchangeably in high-temperature applications?

A: All three parts operate across -55°C to 155°C. The 3-1625868-0 offers lower temperature coefficient (±25ppm/°C) compared to the original and ERA-6AHD10R7V (both ±50ppm/°C), providing better stability across temperature extremes.

Q: Is packaging format identical across all parts?

A: All parts use 0805 (2012 Metric) package. Height specifications are: RT0805FRE0710R7L and ERA-6AHD10R7V at 0.024" (0.60mm); 3-1625868-0 at 0.026" (0.65mm). Verify PCB clearance for the TE Connectivity part.