RT0805FRE07105RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07105RL is a 105 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The component is ROHS3 compliant and carries MSL Level 1 moisture sensitivity rating. As an active product with established supply availability, equivalent and substitute parts are available from alternative manufacturers offering improved tolerance specifications or enhanced automotive qualification.

Substiute Parts

RT0805FRE07105RL

YAGEOIn Stock: 1208RT0805FRE07105RL Datasheet

Current PartRFQ

2-2176091-6

TE Connectivity Passive ProductIn Stock: 33842-2176091-6 Datasheet

DirectRFQ

ERA-6AEB1050V

Panasonic Electronic ComponentsIn Stock: 5554ERA-6AEB1050V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07105RL is determined by the following critical parameters:

• Resistance Value: Must be 105 Ohms
• Package Type: Must be 0805 (2012 Metric) for mechanical and electrical compatibility
• Composition: Thin film construction required
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Moisture Sensitivity: MSL Level 1 or equivalent
• Termination Count: Must be 2-terminal configuration

Two substitute parts meet these criteria with enhanced specifications:

2-2176091-6 (TE Connectivity Passive Product): Direct electrical equivalent with improved tolerance (±0.1%) and higher power rating (0.25W). Maintains identical package dimensions and temperature range. RoHS non-compliant status represents a compliance difference from the main part.

ERA-6AEB1050V (Panasonic Electronic Components): Direct electrical equivalent with improved tolerance (±0.1%), automotive AEC-Q200 qualification, and ROHS3 compliance. Maintains identical power rating and package specifications as the main part.

Parameter Comparison

Engineering Selection Recommendations

RT0805FRE07105RL (YAGEO): Select for standard industrial applications requiring ROHS3 compliance. Suitable for general-purpose circuits where ±1% tolerance meets design specifications.

2-2176091-6 (TE Connectivity Passive Product): Select for applications requiring improved tolerance (±0.1%) and higher power dissipation capability (0.25W). Not suitable for designs requiring RoHS compliance. Verify RoHS requirements before implementation.

ERA-6AEB1050V (Panasonic Electronic Components): Select for automotive applications requiring AEC-Q200 qualification combined with ROHS3 compliance. Provides improved tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C) while maintaining identical power rating and package footprint as the main part.

Frequently Asked Questions (FAQ)

Q: Can 2-2176091-6 replace RT0805FRE07105RL in all applications?

A: Electrical substitution is valid for circuits where the higher power rating (0.25W vs. 0.125W) and improved tolerance (±0.1% vs. ±1%) are acceptable. However, RoHS non-compliance status must be evaluated against project requirements. Physical footprint and thermal characteristics remain compatible.

Q: What is the primary advantage of ERA-6AEB1050V over the main part?

A: ERA-6AEB1050V provides AEC-Q200 automotive qualification, improved tolerance (±0.1%), and lower temperature coefficient (±25ppm/°C) while maintaining ROHS3 compliance and identical power rating. Select this part for automotive-grade applications.

Q: Are all three parts mechanically interchangeable?

A: Yes. All three parts share identical 0805 (2012 Metric) package dimensions (0.079" L x 0.049" W), 2-terminal configuration, and MSL Level 1 rating. Height variations (0.024" to 0.026" seated maximum) are within standar