RT0805DRE0782K5L Equivalent & Substitute Parts

Part Overview

The RT0805DRE0782K5L is a thin film chip resistor manufactured by YAGEO, rated at 82.5 kOhms with ±0.5% tolerance and 0.125W power dissipation in 0805 (2012 Metric) package format. This component is actively produced and ROHS3 compliant. Substitute parts are identified when equivalent resistance values, package dimensions, and electrical performance parameters align within acceptable tolerances for direct circuit board replacement.

Substiute Parts

RT0805DRE0782K5L

YAGEOIn Stock: 1166RT0805DRE0782K5L Datasheet

Current PartRFQ

RT0805BRD0782K5L

YAGEOIn Stock: 8779RT0805BRD0782K5L Datasheet

UpgradeRFQ

8-2176093-7

TE Connectivity Passive ProductIn Stock: 13438-2176093-7 Datasheet

DirectRFQ

ERA-6AEB8252V

Panasonic Electronic ComponentsIn Stock: 7219ERA-6AEB8252V Datasheet

UpgradeRFQ

RG2012P-8252-B-T5

SusumuIn Stock: 11574RG2012P-8252-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805DRE0782K5L are qualified based on the following criteria:

Primary Substitution Parameters:

• Resistance value: 82.5 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)

Secondary Compatibility Parameters:

• Tolerance: ±0.5% or better (tighter tolerance acceptable)
• Power Rating: 0.125W minimum (higher power rating acceptable)
• Temperature Coefficient: ±50ppm/°C or better (lower coefficient acceptable)
• Moisture Sensitivity Level: 1 (Unlimited) (standard for this category)

All identified substitutes maintain identical physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and electrical characteristics within the specified operating envelope.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD0782K5L (YAGEO): Direct upgrade within the same manufacturer series. Offers improved tolerance (±0.1% vs ±0.5%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating and package specifications. ROHS3 compliant with active product status.

8-2176093-7 (TE Connectivity): Cross-manufacturer substitute with higher power rating (0.25W vs 0.125W), providing additional thermal margin. Tolerance and temperature coefficient match RT0805BRD0782K5L. ROHS3 compliant with active product status. Physical height slightly increased (0.026" vs 0.024").

ERA-6AEB8252V (Panasonic): Automotive-grade substitute with AEC-Q200 qualification. Tolerance and temperature coefficient equivalent to RT0805BRD0782K5L. Maintains 0.125W power rating and standard package dimensions. ROHS3 compliant with active product status. Suitable for applications requiring automotive component qualification.

RG2012P-8252-B-T5 (Susumu): Automotive-grade substitute with AEC-Q200 qualification and anti-sulfur feature. Tolerance and temperature coefficient equivalent to RT0805BRD0782K5L. Maintains 0.125W power rating. ROHS3 compliant with active product status. Lowest seated height (0.020" vs 0.024"), beneficial for space-constrained layouts.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0782K5L replace RT0805DRE0782K5L in all applications?

A: Yes. RT0805BRD0782K5L maintains identical resistance, power rating, package dimensions, and operating temperature range. The improved tolerance (±0.1% vs ±0.5%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) represent performance enhancements compatible with all circuits designed for the original part.

Q: What is the advantage of 8-2176093-7 over the YAGEO alternatives?

A: The 8-2176093-7 provides doubled power dissipation capacity (0.25W vs 0.125W) while maintaining the same package footprint. This allows operation at higher current levels or provides thermal margin in power-sensitive applications. All other electrical parameters remain compatible.

Q: When should ERA-6AEB8252V or RG2012P-8252-B-T5 be selected?

A: These Panasonic and Susumu parts are specified when automotive-grade components with AEC-Q200 qualification are required. Both maintain electrical equivalence to the main part while meeting automotive reliability standards. RG2012P-8252-B-T5 additionally provides anti-sulfur protection and reduced seated height.

Q: Are all substitute parts physically interchangeable on the PCB?

A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W). Seated height variations (0.020" to 0.026") are within standard PCB assembly tolerances and do not affect placement or soldering.

Q: Do tolerance differences affect circuit performance?

A: Tolerance differences (±0.5% vs ±0.1%) affect initial resistance accuracy. The main part RT0805DRE0782K5L has ±0.5% tolerance, while all substitutes offer ±0.1% tolerance. Tighter tolerance substitutes improve circuit accuracy but do not create incompatibility with designs specified for ±0.5% components.

Q: Are all parts ROHS3 compliant?

A: Yes. The main part and all substitute parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, meeting standard environmental and regulatory requirements for commercial and industrial applications.