RT0805DRE07130RL Equivalent & Substitute Parts

Part Overview

The RT0805DRE07130RL is a 130 Ohms ±0.5% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and RoHS3 compliant. Substitute parts are identified when equivalent resistance values, package dimensions, and power ratings are maintained while offering improved tolerance specifications or enhanced automotive qualification.

Substiute Parts

RT0805DRE07130RL
YAGEOIn Stock: 966RT0805DRE07130RL Datasheet
RT0805DRE07130RL
Current Part
RT0805BRD07130RL
YAGEOIn Stock: 10640RT0805BRD07130RL Datasheet
RT0805BRD07130RL
Upgrade
3-2176091-5
TE Connectivity Passive ProductIn Stock: 30943-2176091-5 Datasheet
3-2176091-5
Direct
ERA-6AEB131V
Panasonic Electronic ComponentsIn Stock: 21579ERA-6AEB131V Datasheet
ERA-6AEB131V
Upgrade
RG2012P-131-B-T5
SusumuIn Stock: 5999RG2012P-131-B-T5 Datasheet
RG2012P-131-B-T5
Upgrade

Key Parameters

Parameter Value
Resistance 130 Ohms
Tolerance ±0.5%
Power Rating 0.125W (1/8W)
Package / Case 0805 (2012 Metric)
Composition Thin Film
Operating Temperature Range -55°C ~ 155°C
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805DRE07130RL is determined by the following criteria:

  • Resistance value: 130 Ohms (exact match required)
  • Package / Case: 0805 (2012 Metric) (exact match required)
  • Composition: Thin Film (exact match required)
  • Operating temperature range: -55°C ~ 155°C (minimum requirement)
  • RoHS3 compliance (required)
  • Tolerance: ±0.5% or better (equal or tighter tolerance acceptable)
  • Power rating: 0.125W minimum (equal or higher acceptable)

All identified substitute parts meet or exceed these criteria. Upgrades include improved tolerance specifications (±0.1% vs ±0.5%) and automotive AEC-Q200 qualification where applicable.

Parameter Comparison

Manufacturer Part Number Manufacturer Resistance Tolerance Power (Watts) Temperature Coefficient Package / Case RoHS Status Automotive Rating
RT0805DRE07130RL YAGEO 130 Ohms ±0.5% 0.125W ±50ppm/°C 0805 (2012 Metric) ROHS3 Compliant
RT0805BRD07130RL YAGEO 130 Ohms ±0.1% 0.125W ±25ppm/°C 0805 (2012 Metric) ROHS3 Compliant
3-2176091-5 TE Connectivity Passive Product 130 Ohms ±0.1% 0.25W ±25ppm/°C 0805 (2012 Metric) ROHS3 Compliant
ERA-6AEB131V Panasonic Electronic Components 130 Ohms ±0.1% 0.125W ±25ppm/°C 0805 (2012 Metric) ROHS3 Compliant AEC-Q200
RG2012P-131-B-T5 Susumu 130 Ohms ±0.1% 0.125W ±25ppm/°C 0805 (2012 Metric) ROHS3 Compliant AEC-Q200

Engineering Selection Recommendations

All substitute parts maintain active product status and ROHS3 compliance. Selection between substitutes depends on application requirements:

RT0805BRD07130RL offers improved tolerance (±0.1% vs ±0.5%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) within the same YAGEO RT series, maintaining identical power rating and package specifications.

3-2176091-5 provides increased power dissipation capability (0.25W vs 0.125W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient from TE Connectivity, suitable for applications requiring higher thermal margin.

ERA-6AEB131V and RG2012P-131-B-T5 are qualified to automotive AEC-Q200 standard. ERA-6AEB131V is manufactured by Panasonic, while RG2012P-131-B-T5 includes anti-sulfur protection and is manufactured by Susumu. Both maintain ±0.1% tolerance and ±25ppm/°C temperature coefficient.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07130RL directly replace RT0805DRE07130RL?

A: Yes. Both parts share identical resistance (130 Ohms), package (0805), power rating (0.125W), and operating temperature range (-55°C ~ 155°C). RT0805BRD07130RL offers tighter tolerance (±0.1% vs ±0.5%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C).

Q: What is the advantage of 3-2176091-5 over the original part?

A: 3-2176091-5 maintains all critical parameters but provides double the power rating (0.25W vs 0.125W), improved tolerance (±0.1%), and lower temperature coefficient (±25ppm/°C). This is beneficial for applications with higher thermal stress or requiring enhanced reliability margins.

Q: When should ERA-6AEB131V or RG2012P-131-B-T5 be selected?

A: These parts are appropriate for automotive applications requiring AEC-Q200 qualification. Both offer ±0.1% tolerance and ±25ppm/°C temperature coefficient. RG2012P-131-B-T5 includes additional anti-sulfur protection.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All parts are supplied in Tape & Reel (TR) packaging and use the 0805 (2012 Metric) package / case specification, ensuring compatibility with standard PCB assembly processes.

Q: What is the significance of temperature coefficient differences?

A: Temperature coefficient indicates resistance value drift with temperature change. The original part has ±50ppm/°C; all substitutes offer ±25ppm/°C, resulting in improved stability across the -55°C ~ 155°C operating range.

Request Quote (Ships tomorrow)