RT0805DRD0723K2L Equivalent & Substitute Parts

Part Overview

The RT0805DRD0723K2L is a 23.2 kOhms ±0.5% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W). Manufactured by YAGEO and compliant with ROHS3, this component is currently active in production. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and operating parameters.

Substiute Parts

RT0805DRD0723K2L

YAGEOIn Stock: 760RT0805DRD0723K2L Datasheet

Current PartRFQ

RT0805BRD0723K2L

YAGEOIn Stock: 3310RT0805BRD0723K2L Datasheet

UpgradeRFQ

3-2176093-8

TE Connectivity Passive ProductIn Stock: 12323-2176093-8 Datasheet

DirectRFQ

RNCF0805DTE23K2

Stackpole Electronics IncIn Stock: 1264RNCF0805DTE23K2 Datasheet

DirectRFQ

ERA-6AEB2322V

Panasonic Electronic ComponentsIn Stock: 830ERA-6AEB2322V Datasheet

UpgradeRFQ

RG2012P-2322-B-T5

SusumuIn Stock: 5644RG2012P-2322-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 23.2 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)

Allowable Variation Parameters:

• Tolerance: ±0.5% or tighter (±0.1% acceptable as upgrade)
• Power Rating: 0.125W minimum (0.25W acceptable as upgrade)
• RoHS Status: ROHS3 Compliant (required)
• Moisture Sensitivity Level: 1 (Unlimited) (required)

Substitute parts are grouped by tolerance and power rating characteristics. Tighter tolerance and higher power rating substitutes are classified as upgrades. Parts with identical specifications are classified as direct equivalents.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Specifications): No direct equivalent parts exist with identical tolerance (±0.5%) and power rating (0.125W) from alternative manufacturers.

Upgrade Substitutes (Improved Specifications):

RT0805BRD0723K2L (YAGEO) — Tighter tolerance upgrade (±0.1% vs ±0.5%) with identical power rating and package. Same manufacturer series maintains design consistency. ROHS3 compliant, MSL 1.

3-2176093-8 (TE Connectivity) — Dual upgrade with tighter tolerance (±0.1%) and higher power rating (0.25W vs 0.125W). TE Connectivity RP73P series provides enhanced thermal performance. ROHS3 compliant, MSL 1.

RNCF0805DTE23K2 (Stackpole Electronics) — Higher power rating upgrade (0.25W vs 0.125W) with matching tolerance (±0.5%). AEC-Q200 automotive qualification provides additional reliability certification. ROHS3 compliant, MSL 1.

ERA-6AEB2322V (Panasonic) — Tighter tolerance upgrade (±0.1%) with identical power rating. AEC-Q200 automotive qualification included. ROHS3 compliant, MSL 1.

RG2012P-2322-B-T5 (Susumu) — Tighter tolerance upgrade (±0.1%) with identical power rating. Anti-sulfur feature and AEC-Q200 automotive qualification provide enhanced environmental protection. ROHS3 compliant, MSL 1.

All substitute parts maintain active product status and full ROHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0723K2L replace RT0805DRD0723K2L in any application?

A: Yes. RT0805BRD0723K2L is a direct upgrade with tighter tolerance (±0.1% vs ±0.5%) and identical power rating, package, and operating parameters. It is pin-compatible and footprint-compatible.

Q: What is the difference between 0.125W and 0.25W power ratings?

A: Power rating indicates maximum continuous power dissipation. A 0.25W part can safely dissipate twice the power of a 0.125W part. Higher power rating provides thermal margin but does not change electrical performance at equivalent current levels.

Q: Are AEC-Q200 qualified parts suitable for non-automotive applications?

A: Yes. AEC-Q200 qualification indicates enhanced reliability testing and environmental stress screening. These parts exceed standard commercial specifications and are suitable for any application requiring higher reliability margins.

Q: What does ±0.1% tolerance mean compared to ±0.5%?

A: Tolerance defines the maximum deviation from the nominal resistance value. ±0.1% tolerance provides tighter resistance accuracy (±23.2 Ohms maximum deviation) compared to ±0.5% (±116 Ohms maximum deviation). Tighter tolerance is beneficial in precision analog circuits and measurement applications.

Q: Is the 0805 package footprint identical across all substitute parts?

A: Yes. All substitute parts use 0805 (2012 Metric) package with identical footprint dimensions (2.00mm L × 1.25mm W). Height variation exists (0.60mm to 0.65mm maximum seated height), which does not affect PCB assembly compatibility.

Q: What does Anti-Sulfur feature mean in RG2012P-2322-B-T5?

A: Anti-sulfur coating protects the resistor element from sulfur-containing environmental contaminants that can degrade performance in industrial or harsh environments. This feature is beneficial for applications exposed to atmospheric sulfur compounds.

Q: Can I use a substitute part with different tolerance in a precision measurement circuit?

A: Tolerance selection depends on circuit requirements. For precision applications requiring tight resistance accuracy, ±0.1% tolerance parts (RT0805BRD0723K2L, ERA-6AEB2322V, RG2012P-2322-B-T5) are recommended over ±0.5% tolerance parts.