RT0805DRD07102KL Equivalent & Substitute Parts

Part Overview

The RT0805DRD07102KL is a 102 kOhms ±0.5% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface-mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL 1 (Unlimited) moisture sensitivity rating. Equivalent and substitute parts are identified based on matching resistance value, package format, and electrical performance parameters while accommodating tolerance and power rating variations.

Substiute Parts

RT0805DRD07102KL

YAGEOIn Stock: 1138RT0805DRD07102KL Datasheet

Current PartRFQ

RT0805BRD07102KL

YAGEOIn Stock: 8910RT0805BRD07102KL Datasheet

UpgradeRFQ

9-2176093-5

TE Connectivity Passive ProductIn Stock: 22739-2176093-5 Datasheet

DirectRFQ

ERA-6AEB1023V

Panasonic Electronic ComponentsIn Stock: 13147ERA-6AEB1023V Datasheet

UpgradeRFQ

RG2012P-1023-B-T5

SusumuIn Stock: 32750RG2012P-1023-B-T5 Datasheet

UpgradeRFQ

TNPW0805102KBEEA

Vishay DaleIn Stock: 3172TNPW0805102KBEEA Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805DRD07102KL are qualified based on the following criteria:

Primary Matching Parameters:

• Resistance value: 102 kOhms (exact match required)
• Package format: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C minimum (exact match or extended range acceptable)

Allowable Variations:

• Tolerance: ±0.5% or tighter (±0.1% acceptable as upgrade)
• Power Rating: 0.125W or higher (0.25W and 0.26W acceptable as upgrades)
• Temperature Range: Extended upper limit acceptable (175°C acceptable)
• Certifications: AEC-Q200 automotive qualification acceptable as upgrade
• Features: Anti-Sulfur and Moisture Resistant features acceptable as upgrades

All substitute parts maintain identical physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and two-termination configuration.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Same Tolerance, Same Power Rating):

• RT0805BRD07102KL (YAGEO): Identical specifications with tighter ±0.1% tolerance. Preferred for applications requiring improved accuracy over the ±0.5% original specification.

Upgraded Substitutes (Tighter Tolerance, Higher Power Rating):

• 9-2176093-5 (TE Connectivity): Offers ±0.1% tolerance and 0.25W power rating. Suitable for applications with higher thermal dissipation requirements or improved precision needs.
• ERA-6AEB1023V (Panasonic): Provides ±0.1% tolerance with AEC-Q200 automotive qualification. Appropriate for automotive and high-reliability applications.
• RG2012P-1023-B-T5 (Susumu): Delivers ±0.1% tolerance, AEC-Q200 automotive qualification, and anti-sulfur coating. Specified for automotive environments with corrosive exposure risk.
• TNPW0805102KBEEA (Vishay Dale): Combines ±0.1% tolerance, 0.26W power rating, extended operating temperature to 175°C, AEC-Q200 qualification, anti-sulfur coating, and moisture resistance. Optimal for high-reliability automotive and industrial applications.

All substitute parts maintain ROHS3 compliance and MSL 1 rating. Selection should be based on application requirements for tolerance precision, thermal dissipation, environmental certifications, and operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07102KL replace RT0805DRD07102KL directly? A: Yes. Both parts share identical resistance, power rating, package, and operating temperature specifications. RT0805BRD07102KL offers improved tolerance (±0.1% vs ±0.5%) and is a direct upgrade.

Q: What is the difference between the 0.125W and 0.25W power ratings? A: Power rating indicates maximum continuous power dissipation. The 0.25W variant (9-2176093-5) can safely dissipate twice the thermal energy. Selection depends on circuit current and voltage conditions. Higher power rating provides thermal margin but does not affect electrical performance in standard applications.

Q: Are automotive-qualified parts (AEC-Q200) compatible with non-automotive applications? A: Yes. AEC-Q200 qualification represents enhanced reliability testing and environmental stress screening. These parts exceed standard requirements and are fully compatible with non-automotive circuits.

Q: What does anti-sulfur coating provide? A: Anti-sulfur coating (RG2012P-1023-B-T5, TNPW0805102KBEEA) protects against sulfur-induced corrosion in industrial and automotive environments with atmospheric sulfur exposure. Standard parts without this feature are suitable for controlled environments.

Q: Can I use TNPW0805102KBEEA in place of RT0805DRD07102KL? A: Yes. TNPW0805102KBEEA is a full substitute with enhanced specifications: tighter tolerance (±0.1%), higher power rating (0.26W), extended temperature range (-55°C to 175°C), AEC-Q200 qualification, anti-sulfur coating, and moisture resistance. It is suitable for all applications requiring RT0805DRD07102KL.

Q: Do all substitute parts have identical physical dimensions? A: All parts use the 0805 (2012 Metric) package with matching length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Height varies slightly (0.020" to 0.026" / 0.50mm to 0.65mm) but remains within standard PCB assembly tolerances and does not affect board-level compatibility.

Q: What is MSL 1 (Unlimited) moisture sensitivity? A: MSL 1 indicates the component has unlimited shelf life without moisture baking requirements. All listed parts carry MSL 1 rating and require no special moisture control during storage or handling.