Equivalent & Substitute Parts for RT0805CRE07976RL

Part Overview

The RT0805CRE07976RL is a 976 Ohms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This YAGEO component is Active status and ROHS3 compliant. Substitute parts are identified when equivalent resistance values, package dimensions, and operating temperature ranges align with the original specification, enabling direct circuit board replacement without design modification.

Substiute Parts

RT0805CRE07976RL

YAGEOIn Stock: 1094RT0805CRE07976RL Datasheet

Current PartRFQ

RT0805BRD07976RL

YAGEOIn Stock: 1138RT0805BRD07976RL Datasheet

UpgradeRFQ

1-2176092-7

TE Connectivity Passive ProductIn Stock: 29171-2176092-7 Datasheet

DirectRFQ

ERA-6AEB9760V

Panasonic Electronic ComponentsIn Stock: 7814ERA-6AEB9760V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805CRE07976RL is determined by the following criteria:

• Resistance value must equal 976 Ohms
• Package must be 0805 (2012 Metric) with identical physical dimensions (0.079" L x 0.049" W)
• Operating temperature range must encompass -55°C ~ 155°C
• Composition must be thin film
• Number of terminations must be 2
• RoHS3 compliance required

Tolerance, power rating, and temperature coefficient may vary within acceptable substitution parameters. Parts meeting these criteria are classified as direct or upgrade substitutes based on tolerance and performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and ROHS3 compliance, ensuring regulatory alignment with the original RT0805CRE07976RL specification.

RT0805BRD07976RL and ERA-6AEB9760V provide improved tolerance (±0.1% versus ±0.25%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C), representing performance upgrades suitable for applications requiring tighter resistance accuracy.

1-2176092-7 offers increased power dissipation capability (0.25W versus 0.125W) with equivalent tolerance and temperature coefficient characteristics. Maximum seated height is 0.026" (0.65mm) compared to 0.024" (0.60mm) for other substitutes; board layout clearance must be verified for this part.

ERA-6AEB9760V includes Automotive AEC-Q200 qualification, appropriate for automotive and high-reliability applications.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07976RL replace RT0805CRE07976RL in any circuit?

A: Yes. Both parts share identical resistance value, package dimensions, operating temperature range, and power rating. RT0805BRD07976RL provides tighter tolerance (±0.1% versus ±0.25%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), making it suitable for direct substitution with improved performance characteristics.

Q: What is the difference between the main part and 1-2176092-7?

A: The primary difference is power rating: 1-2176092-7 is rated for 0.25W (1/4W) compared to 0.125W (1/8W) for RT0805CRE07976RL. Both maintain 976 Ohms resistance and ±0.1% tolerance. Maximum seated height differs by 0.002" (0.05mm). This part is suitable for applications requiring higher power dissipation in the same package footprint.

Q: Is ERA-6AEB9760V suitable for automotive applications?

A: Yes. ERA-6AEB9760V carries Automotive AEC-Q200 qualification and is appropriate for automotive and high-reliability environments. It maintains 976 Ohms resistance with ±0.1% tolerance and ±25ppm/°C temperature coefficient.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All listed substitutes are supplied in Tape & Reel (TR) packaging. Physical dimensions conform to 0805 (2012 Metric) standard, with maximum seated heights of 0.024" (0.60mm) for RT0805BRD07976RL, ERA-6AEB9760V, and 0.026" (0.65mm) for 1-2176092-7.

Q: What compliance certifications apply to all parts?

A: All parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited). ECCN classification is EAR99 for all parts. REACH status is REACH Unaffected for YAGEO and Panasonic parts; TE Connectivity part shows Vendor Undefined REACH status.