RT0805CRE07910RL Equivalent & Substitute Parts

Part Overview

The RT0805CRE07910RL is a 910 Ohms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W). Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package format, power rating, and composition, with tolerance and temperature coefficient variations available for applications requiring enhanced precision or automotive qualification.

Substiute Parts

RT0805CRE07910RL

YAGEOIn Stock: 1040RT0805CRE07910RL Datasheet

Current PartRFQ

RT0805BRD07910RL

YAGEOIn Stock: 12214RT0805BRD07910RL Datasheet

UpgradeRFQ

ERA-6AEB911V

Panasonic Electronic ComponentsIn Stock: 5173ERA-6AEB911V Datasheet

UpgradeRFQ

ERA-6APB911V

Panasonic Electronic ComponentsIn Stock: 1091ERA-6APB911V Datasheet

UpgradeRFQ

RG2012P-911-B-T5

SusumuIn Stock: 5925RG2012P-911-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following mandatory parameters:

• Resistance Value: Must be 910 Ohms
• Package Format: Must be 0805 (2012 Metric)
• Power Rating: Must be 0.125W (1/8W)
• Composition: Must be Thin Film
• Operating Temperature Range: Must support -55°C ~ 155°C
• Termination Count: Must be 2 terminations
• Compliance: Must be ROHS3 compliant

Tolerance and temperature coefficient are secondary parameters that may vary. Tighter tolerance (±0.1%) and lower temperature coefficient (±15ppm/°C to ±25ppm/°C) represent performance upgrades. Automotive AEC-Q200 qualification and anti-sulfur features are optional enhancements for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD07910RL (YAGEO): Direct upgrade within the same manufacturer series. Improves tolerance to ±0.1% and reduces temperature coefficient to ±25ppm/°C while maintaining identical package and power specifications. Suitable for applications requiring enhanced precision without automotive qualification requirements.

ERA-6AEB911V (Panasonic): Provides ±0.1% tolerance with AEC-Q200 automotive qualification. Temperature coefficient of ±25ppm/°C. Select for automotive applications requiring established supplier qualification.

ERA-6APB911V (Panasonic): Offers the tightest temperature coefficient at ±15ppm/°C with ±0.1% tolerance and AEC-Q200 qualification. Select for temperature-sensitive automotive circuits requiring superior stability.

RG2012P-911-B-T5 (Susumi): Combines ±0.1% tolerance, AEC-Q200 qualification, and anti-sulfur protection. Seated height of 0.020" (0.50mm) versus 0.024" (0.60mm) for other parts. Select for automotive applications in corrosive environments or where PCB clearance is constrained.

All substitute parts maintain active product status and ROHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07910RL replace RT0805CRE07910RL in any application?

A: Yes. RT0805BRD07910RL is a direct substitute with improved tolerance (±0.1% vs ±0.25%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C). All other electrical and mechanical parameters are identical. No design changes are required.

Q: What is the difference between the YAGEO and Panasonic options?

A: YAGEO RT series parts are industrial-grade. Panasonic ERA-6A series parts include AEC-Q200 automotive qualification. Select Panasonic parts for automotive applications or when supplier qualification is required.

Q: Why does RG2012P-911-B-T5 have a different seated height?

A: RG2012P-911-B-T5 has a maximum seated height of 0.020" (0.50mm) compared to 0.024" (0.60mm) for other parts. This 0.004" difference may be relevant for applications with tight PCB clearance constraints. Verify PCB layout compatibility before selection.

Q: Which substitute offers the best temperature stability?

A: ERA-6APB911V provides the lowest temperature coefficient at ±15ppm/°C, compared to ±25ppm/°C for RT0805BRD07910RL, ERA-6AEB911V, and RG2012P-911-B-T5. Select ERA-6APB911V for circuits sensitive to temperature-induced resistance drift.

Q: Are all substitutes available in the same packaging format?

A: Yes. All listed substitutes are supplied in Tape & Reel (TR) packaging in 0805 (2012 Metric) format, matching the original RT0805CRE07910RL specification.

Q: Can I use automotive-rated parts in non-automotive applications?

A: Yes. Automotive-rated parts (ERA-6AEB911V, ERA-6APB911V, RG2012P-911-B-T5) meet or exceed industrial specifications and are fully compatible with non-automotive designs. No design modifications are necessary.