RT0805CRE0768RL Equivalent & Substitute Parts

Part Overview

The RT0805CRE0768RL is a 68 Ohm thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device delivers 0.125W (1/8W) power rating with ±0.25% tolerance and operates across -55°C to 155°C. The part is Active status and ROHS3 compliant, making it suitable for general-purpose precision resistor applications. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the allowed parameter ranges for this resistor category.

Substiute Parts

RT0805CRE0768RL

YAGEOIn Stock: 1041RT0805CRE0768RL Datasheet

Current PartRFQ

RT0805BRD0768RL

YAGEOIn Stock: 5913RT0805BRD0768RL Datasheet

UpgradeRFQ

ERA-6AEB680V

Panasonic Electronic ComponentsIn Stock: 14517ERA-6AEB680V Datasheet

UpgradeRFQ

RG2012P-680-B-T5

SusumuIn Stock: 10903RG2012P-680-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805CRE0768RL are qualified based on the following criteria:

Electrical Equivalence: All substitute parts maintain the same 68 Ohm resistance value and 0.125W power rating. Tolerance specifications may be equal to or tighter than the original part (±0.25% or better).

Mechanical Compatibility: All substitutes use the identical 0805 (2012 Metric) package with matching footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and compatible height specifications.

Environmental Compliance: All substitutes maintain ROHS3 compliance, MSL Level 1 rating, and the same operating temperature range (-55°C ~ 155°C).

Composition: All substitutes are thin film resistors, ensuring consistent performance characteristics.

The three qualified substitutes represent upgrades in tolerance specification (±0.1% vs. ±0.25%) and include automotive-grade options with AEC-Q200 certification and anti-sulfur features where applicable.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD0768RL (YAGEO): Direct upgrade from the main part with tighter ±0.1% tolerance and improved temperature coefficient (±25ppm/°C vs. ±50ppm/°C). Maintains identical package and footprint. Suitable for applications requiring enhanced precision without automotive qualification requirements.

ERA-6AEB680V (Panasonic Electronic Components): Offers ±0.1% tolerance with AEC-Q200 automotive qualification. Recommended for automotive and harsh environment applications where automotive-grade reliability is specified. Identical mechanical and electrical compatibility with the main part.

RG2012P-680-B-T5 (Susumu): Provides ±0.1% tolerance with dual automotive qualification (AEC-Q200) and anti-sulfur protection. Lowest seated height (0.020" vs. 0.024") may be advantageous in space-constrained designs. Suitable for automotive applications with corrosive environment exposure.

All three substitutes are Active status products with full ROHS3 compliance and MSL Level 1 rating, ensuring long-term availability and environmental compliance.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0768RL replace RT0805CRE0768RL in any application?

A: Yes. RT0805BRD0768RL maintains identical resistance, power rating, package dimensions, and operating temperature range. The tighter tolerance (±0.1% vs. ±0.25%) and improved temperature coefficient represent performance enhancements with no compatibility issues.

Q: What is the difference between standard and automotive-grade substitutes?

A: ERA-6AEB680V and RG2012P-680-B-T5 carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and environmental stress testing standards. These are required for automotive applications; standard-grade parts are not qualified for automotive use.

Q: Does the height difference in RG2012P-680-B-T5 affect PCB layout?

A: RG2012P-680-B-T5 has a maximum seated height of 0.020" (0.50mm) compared to 0.024" (0.60mm) for other parts. This 0.004" difference is negligible for most applications but may be relevant in extremely space-constrained designs. Footprint and land pattern compatibility remain identical.

Q: Are all substitutes available in Tape & Reel packaging?

A: Yes. All substitute parts are supplied in Tape & Reel (TR) packaging, matching the original part's packaging format for automated assembly compatibility.

Q: Which substitute offers the best performance for precision applications?

A: All three substitutes provide ±0.1% tolerance with ±25ppm/°C temperature coefficient, representing equivalent precision performance. Selection should be based on automotive qualification requirements and environmental factors rather than precision specifications.