Equivalent & Substitute Parts for RT0805CRE07294RL

Part Overview

The RT0805CRE07294RL is a 294 Ohms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is manufactured by YAGEO and maintains Active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and environmental ratings align with application requirements.

Substiute Parts

RT0805CRE07294RL

YAGEOIn Stock: 1249RT0805CRE07294RL Datasheet

Current PartRFQ

RT0805BRD07294RL

YAGEOIn Stock: 1827RT0805BRD07294RL Datasheet

UpgradeRFQ

6-2176091-8

TE Connectivity Passive ProductIn Stock: 19916-2176091-8 Datasheet

DirectRFQ

ERA-6AEB2940V

Panasonic Electronic ComponentsIn Stock: 5424ERA-6AEB2940V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Substitution Criteria:

• Resistance value: 294 Ohms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C to 155°C (exact match required)
• RoHS3 Compliance: Required
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Secondary Substitution Criteria (Allowable Variations):

• Tolerance: ±0.25% or tighter (±0.1% acceptable as upgrade)
• Temperature Coefficient: ±50ppm/°C or tighter (±25ppm/°C acceptable as upgrade)
• Power Rating: 0.125W or higher (0.25W acceptable as upgrade)
• Manufacturer: Different manufacturers acceptable if all primary criteria met
• Features: Automotive AEC-Q200 certification acceptable as additional feature

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD07294RL (YAGEO): Direct upgrade from the main part with improved tolerance (±0.1% vs ±0.25%) and tighter temperature coefficient (±25ppm/°C vs ±50ppm/°C). Maintains identical power rating, package, and operating temperature range. Active product status with ROHS3 compliance.

6-2176091-8 (TE Connectivity): Direct substitute with higher power rating (0.25W vs 0.125W), improved tolerance (±0.1%), and tighter temperature coefficient (±25ppm/°C). Identical package and operating temperature range. Active product status with ROHS3 compliance. Suitable for applications requiring increased power dissipation margin.

ERA-6AEB2940V (Panasonic): Direct upgrade with improved tolerance (±0.1%), tighter temperature coefficient (±25ppm/°C), and Automotive AEC-Q200 certification. Maintains identical power rating, package, and operating temperature range. Active product status with ROHS3 compliance. Appropriate for automotive and high-reliability applications.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07294RL replace RT0805CRE07294RL in my design?

A: Yes. RT0805BRD07294RL is a direct substitute with improved specifications. The tighter tolerance (±0.1% vs ±0.25%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) provide enhanced performance while maintaining identical package, power rating, and operating temperature range.

Q: What is the difference between the main part and 6-2176091-8?

A: Both are 294 Ohm thin film resistors in 0805 package with identical operating temperature range and RoHS3 compliance. The primary difference is power rating: 6-2176091-8 is rated for 0.25W (1/4W) compared to 0.125W (1/8W) for the main part. Additionally, 6-2176091-8 offers improved tolerance and temperature coefficient.

Q: Is ERA-6AEB2940V suitable for automotive applications?

A: Yes. ERA-6AEB2940V carries Automotive AEC-Q200 certification and is appropriate for automotive-grade applications. It maintains all electrical and mechanical compatibility with the main part while providing improved tolerance and temperature coefficient specifications.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All substitute parts are supplied in Tape & Reel (TR) packaging and are compatible with standard SMD assembly equipment for 0805 (2012 Metric) components.

Q: Can I use a substitute part with higher power rating in place of the original?

A: Yes. A higher power rating (0.25W vs 0.125W) is acceptable as it provides additional thermal margin. The component will function correctly in applications designed for the original 0.125W rating.