RT0805CRE07118RL Equivalent & Substitute Parts

Part Overview

The RT0805CRE07118RL is a 118 Ohms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This YAGEO component operates across -55°C to 155°C and is ROHS3 compliant with MSL 1 rating. The part is currently active in production with 951 pieces in stock inventory.

Substitute parts are identified when equivalent resistance values, package dimensions, and operating temperature ranges are maintained while allowing variations in tolerance, power rating, and manufacturer specifications.

Substiute Parts

RT0805CRE07118RL

YAGEOIn Stock: 1031RT0805CRE07118RL Datasheet

Current PartRFQ

RT0805BRD07118RL

YAGEOIn Stock: 4789RT0805BRD07118RL Datasheet

UpgradeRFQ

3-2176091-1

TE Connectivity Passive ProductIn Stock: 17593-2176091-1 Datasheet

DirectRFQ

ERA-6AEB1180V

Panasonic Electronic ComponentsIn Stock: 19904ERA-6AEB1180V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805CRE07118RL is determined by the following mandatory parameters:

• Resistance value: 118 Ohms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm) (exact match required)

Allowable variations in substitute parts include tolerance (±0.1% or tighter), power rating (equal or higher), temperature coefficient (±25ppm/°C or better), and manufacturer identity. All substitute parts maintain ROHS3 compliance and MSL 1 rating.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active production status and ROHS3 compliance. Selection between RT0805CRE07118RL and its substitutes depends on application-specific requirements:

RT0805BRD07118RL offers improved tolerance (±0.1% versus ±0.25%) and superior temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical power rating and package specifications. This upgrade is suitable for precision applications requiring tighter resistance stability.

3-2176091-1 from TE Connectivity provides higher power dissipation capability (0.25W versus 0.125W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. The seated height increases to 0.026" (0.65mm) maximum. This part accommodates higher thermal loads while maintaining package footprint compatibility.

ERA-6AEB1180V from Panasonic includes AEC-Q200 automotive qualification with ±0.1% tolerance and ±25ppm/°C temperature coefficient. This part is suitable for automotive applications requiring automotive-grade reliability certification. Inventory availability is significantly higher at 19,811 pieces.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07118RL replace RT0805CRE07118RL in all applications?

A: Yes, RT0805BRD07118RL is a direct substitute. It maintains identical resistance, package, power rating, and operating temperature range. The improved tolerance (±0.1% versus ±0.25%) and temperature coefficient (±25ppm/°C versus ±50ppm/°C) provide enhanced performance characteristics suitable for precision circuits.

Q: What is the difference between 3-2176091-1 and the main part?

A: 3-2176091-1 differs in power rating (0.25W versus 0.125W) and seated height (0.026" versus 0.024" maximum). All other electrical parameters and package footprint remain compatible. The higher power rating accommodates applications with greater thermal dissipation requirements.

Q: Is ERA-6AEB1180V suitable for non-automotive applications?

A: Yes. ERA-6AEB1180V meets all electrical and mechanical requirements for direct substitution. The AEC-Q200 automotive qualification is an additional certification that does not restrict use in non-automotive circuits. This part offers superior inventory availability.

Q: Do all substitute parts have identical PCB footprints?

A: All substitute parts use the 0805 (2012 Metric) package with identical length (0.079") and width (0.049"). The seated height of 3-2176091-1 is 0.026" maximum compared to 0.024" for other parts. This minimal difference does not affect standard PCB layout compatibility.

Q: What tolerance should I specify for critical precision circuits?

A: For precision applications, specify ±0.1% tolerance. RT0805BRD07118RL, 3-2176091-1, and ERA-6AEB1180V all meet this requirement. The original RT0805CRE07118RL at ±0.25% tolerance is suitable for general-purpose applications with less stringent accuracy requirements.