RT0805CRE07100RL Equivalent & Substitute Parts

Part Overview

The RT0805CRE07100RL is a 100 Ohms ±0.25% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. Currently in active production status with 1125 pieces available in stock.

Equivalent and substitute parts are identified when they maintain the same resistance value (100 Ohms), package footprint (0805), and power rating (0.125W, 1/8W) while meeting or exceeding the tolerance and temperature coefficient specifications. Substitutes may offer improved tolerance grades, enhanced features such as automotive qualification or anti-sulfur composition, or alternative packaging formats.

Substiute Parts

RT0805CRE07100RL

YAGEOIn Stock: 1137RT0805CRE07100RL Datasheet

Current PartRFQ

RT0805BRD07100RL

YAGEOIn Stock: 3501RT0805BRD07100RL Datasheet

UpgradeRFQ

RT0805BRE07100RL

YAGEOIn Stock: 16337RT0805BRE07100RL Datasheet

UpgradeRFQ

2-2176091-4

TE Connectivity Passive ProductIn Stock: 8652-2176091-4 Datasheet

DirectRFQ

ERA-6AEB101V

Panasonic Electronic ComponentsIn Stock: 43700ERA-6AEB101V Datasheet

UpgradeRFQ

MCU08050D1000BP500

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 8566MCU08050D1000BP500 Datasheet

UpgradeRFQ

RG2012N-101-W-T5

SusumuIn Stock: 5883RG2012N-101-W-T5 Datasheet

UpgradeRFQ

RG2012P-101-B-T5

SusumuIn Stock: 141365RG2012P-101-B-T5 Datasheet

UpgradeRFQ

RG2012V-101-P-T1

SusumuIn Stock: 6592RG2012V-101-P-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Compatibility Requirements:

• Resistance value: 100 Ohms (exact match required)
• Package footprint: 0805 (2012 Metric) (exact match required)
• Power rating: Minimum 0.125W (1/8W); higher ratings are acceptable
• Composition: Thin film construction

Secondary Compatibility Parameters:

• Tolerance: ±0.25% or better (lower tolerance values are acceptable upgrades)
• Temperature coefficient: ±50ppm/°C or better (lower values are acceptable upgrades)
• Operating temperature range: Must encompass -55°C to 155°C minimum
• RoHS and MSL compliance: Must maintain ROHS3 and MSL Level 1 status

Packaging Format Variations: Substitutes are available in Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® formats. Both formats are mechanically and electrically equivalent; selection depends on assembly process requirements.

Feature Enhancements: Some substitutes include automotive AEC-Q200 qualification or anti-sulfur composition. These are functional upgrades that do not affect direct substitutability.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Same Tolerance Grade): RT0805BRE07100RL (YAGEO) is the primary direct substitute, offering identical electrical performance with ±0.1% tolerance upgrade and matching Tape & Reel packaging. This part maintains full compatibility with the original design while providing improved tolerance characteristics.

Tolerance-Upgraded Substitutes: RT0805BRD07100RL, ERA-6AEB101V, MCU08050D1000BP500, RG2012P-101-B-T5, and RG2012N-101-W-T5 all provide ±0.1% tolerance or better. These parts are suitable for applications requiring tighter tolerance control. ERA-6AEB101V and RG2012P-101-B-T5 carry AEC-Q200 automotive qualification, appropriate for automotive and high-reliability applications.

Precision-Grade Substitutes: RG2012N-101-W-T5 (±0.05%) and RG2012V-101-P-T1 (±0.02%) are precision-grade alternatives with significantly lower temperature coefficients (±10ppm/°C and ±5ppm/°C respectively). Both include AEC-Q200 qualification and anti-sulfur composition. These are suitable for precision measurement circuits and applications with stringent stability requirements.

Higher Power Rating Substitute: 2-2176091-4 (TE Connectivity) provides 0.25W (1/4W) power rating while maintaining 100 Ohms resistance and ±0.1% tolerance. This part is suitable for applications requiring increased thermal headroom.

Temperature Range Consideration: MCU08050D1000BP500 operates to -55°C to 125°C, which is narrower than the original specification (-55°C to 155°C). This part is suitable only for applications not exceeding 125°C maximum operating temperature.

Packaging Format Selection: Tape & Reel (TR) packaging is standard for high-volume automated assembly. Cut Tape (CT) & Digi-Reel® format is suitable for lower-volume or mixed-component assembly processes. Both formats are electrically and mechanically equivalent.

Frequently Asked Questions (FAQ)

Q: Can I substitute RT0805BRE07100RL for RT0805CRE07100RL? A: Yes. RT0805BRE07100RL is a direct substitute with improved ±0.1% tolerance (versus ±0.25%), identical power rating (0.125W), same package (0805), and matching operating temperature range (-55°C to 155°C). Both are ROHS3 compliant with MSL Level 1 rating.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging? A: Both formats contain identical components in 0805 package. Tape & Reel (TR) is supplied on continuous carrier tape suitable for high-speed automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® is pre-cut tape on a reel, suitable for lower-volume or manual assembly processes. Electrical and mechanical specifications are identical.

Q: Can I use RG2012V-101-P-T1 (±0.02% tolerance) in place of RT0805CRE07100RL (±0.25% tolerance)? A: Yes. RG2012V-101-P-T1 is a precision-grade upgrade with tighter tolerance (±0.02%), lower temperature coefficient (±5ppm/°C versus ±50ppm/°C), and AEC-Q200 automotive qualification. All mechanical and electrical parameters are compatible. This substitution is suitable for precision applications requiring enhanced stability.

Q: Is MCU08050D1000BP500 compatible with my design? A: MCU08050D1000BP500 is compatible if your application operates within -55°C to 125°C. The original part specification extends to 155°C. If your design requires operation above 125°C, this part is not suitable. All other parameters (100 Ohms, ±0.1% tolerance, 0.125W, 0805 package) are compatible.

Q: What does AEC-Q200 qualification mean? A: AEC-Q200 is an automotive industry standard qualification for passive components. Parts carrying this rating (ERA-6AEB101V, RG2012N-101-W-T5, RG2012P-101-B-T5, RG2012V-101-P-T1) have undergone enhanced reliability testing and are suitable for automotive and high-reliability applications. Non-automotive parts (YAGEO RT series, TE Connectivity 2-2176091-4, Vishay MCU series) are suitable for general industrial and consumer applications.

Q: Can I use 2-2176091-4 (0.25W) instead of RT0805CRE07100RL (0.125W)? A: Yes. 2-2176091-4 provides higher power dissipation capability (0.25W versus 0.125W) while maintaining 100 Ohms resistance, ±0.1% tolerance, and 0805 package. This substitution is suitable for applications requiring increased thermal margin. The higher power rating does not negatively affect performance in lower-power applications.

Q: What does anti-sulfur composition mean? A: Anti-sulfur composition (featured in MCU08050D1000BP500, RG2012N-101-W-T5, RG2012P-101-B-T5, RG2012V-101-P-T1) provides enhanced resistance to sulfur-containing environmental contaminants. This feature is beneficial in industrial environments with high sulfur exposure but does not affect electrical performance in standard operating conditions.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, matching the original RT0805CRE07100RL specification.