Equivalent & Substitute Parts for RT0805BRE07976RL

Part Overview

The RT0805BRE07976RL is a 976 Ohms ±0.1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with a temperature coefficient of ±50ppm/°C and operates across -55°C to 155°C. The part is ROHS3 compliant with MSL 1 rating and is currently in active production status. Equivalent and substitute parts are identified for applications requiring alternative sourcing, improved specifications, or automotive-grade reliability.

Substiute Parts

RT0805BRE07976RL

YAGEOIn Stock: 1066RT0805BRE07976RL Datasheet

Current PartRFQ

RT0805BRD07976RL

YAGEOIn Stock: 1138RT0805BRD07976RL Datasheet

UpgradeRFQ

1-2176092-7

TE Connectivity Passive ProductIn Stock: 29171-2176092-7 Datasheet

DirectRFQ

ERA-6AEB9760V

Panasonic Electronic ComponentsIn Stock: 7814ERA-6AEB9760V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805BRE07976RL is determined by the following criteria:

Critical Parameters (Must Match):

• Resistance value: 976 Ohms
• Tolerance: ±0.1%
• Package: 0805 (2012 Metric)
• Composition: Thin Film
• Operating temperature range: -55°C to 155°C minimum
• RoHS compliance: ROHS3 Compliant

Allowable Variations:

• Power rating: Equal or greater than 0.125W
• Temperature coefficient: Equal or lower absolute value (tighter tolerance acceptable)
• Manufacturer: Different manufacturers permitted if all critical parameters met
• Automotive qualification: Additional feature, not required for substitution

The substitute parts listed below meet all critical parameters and are therefore electrically and mechanically interchangeable with the main part.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are electrically and mechanically compatible with the RT0805BRE07976RL based on matching critical parameters.

RT0805BRD07976RL (YAGEO): Direct equivalent from the same manufacturer with improved temperature coefficient (±25ppm/°C vs ±50ppm/°C). Suitable for direct replacement in existing designs.

1-2176092-7 (TE Connectivity): Meets all substitution criteria with higher power rating (0.25W vs 0.125W), providing additional thermal margin. Physical height is marginally increased (0.026" vs 0.024"). Suitable for applications requiring enhanced power dissipation capability.

ERA-6AEB9760V (Panasonic): Meets all substitution criteria with AEC-Q200 automotive qualification. Temperature coefficient is ±25ppm/°C. Suitable for automotive applications or designs requiring automotive-grade component reliability.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07976RL replace RT0805BRE07976RL directly? A: Yes. Both parts are YAGEO 976 Ohms ±0.1% thin film resistors in 0805 package with identical electrical specifications. RT0805BRD07976RL features a tighter temperature coefficient (±25ppm/°C), making it a direct upgrade.

Q: Is the 1-2176092-7 from TE Connectivity compatible? A: Yes. The 1-2176092-7 matches all critical parameters: 976 Ohms ±0.1%, 0805 package, thin film composition, and -55°C to 155°C operating range. The higher power rating (0.25W) is an allowable variation that does not affect compatibility.

Q: What is the difference between standard and AEC-Q200 versions? A: The ERA-6AEB9760V carries AEC-Q200 automotive qualification, indicating compliance with automotive reliability and quality standards. This is an additional feature; both standard and automotive versions are electrically equivalent for the specified 976 Ohms ±0.1% resistance value.

Q: Are there physical size differences between substitutes? A: All parts use 0805 (2012 Metric) package with dimensions 0.079" L x 0.049" W. Maximum seated height varies slightly: RT0805BRE07976RL and ERA-6AEB9760V are 0.024" (0.60mm), while 1-2176092-7 is 0.026" (0.65mm). This difference is within standard PCB assembly tolerances.

Q: Can I use these substitutes in high-temperature applications? A: All substitute parts operate across -55°C to 155°C, matching the main part specification. For applications approaching 155°C, consider the temperature coefficient: RT0805BRD07976RL, 1-2176092-7, and ERA-6AEB9760V all feature ±25ppm/°C, which is tighter than the main part's ±50ppm/°C.

Q: Are all substitutes ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance of the main part.