RT0805BRE07113RL Equivalent & Substitute Parts

Part Overview

The RT0805BRE07113RL is a 113 Ohm ±0.1% thin film chip resistor in 0805 (2012 Metric) package format, rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified when equivalent resistance values, tolerance specifications, and package dimensions are maintained across alternative manufacturers while accommodating allowable variations in power rating and temperature coefficient within the same product category.

Substiute Parts

RT0805BRE07113RL

YAGEOIn Stock: 987RT0805BRE07113RL Datasheet

Current PartRFQ

2-2176091-9

TE Connectivity Passive ProductIn Stock: 25602-2176091-9 Datasheet

DirectRFQ

ERA-6AEB1130V

Panasonic Electronic ComponentsIn Stock: 6102ERA-6AEB1130V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805BRE07113RL is determined by the following mandatory parameters:

• Resistance value: 113 Ohms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)

Allowable variations in substitute parts include power rating (equal to or greater than 0.125W) and temperature coefficient (within industrial specifications). Two substitute parts meet these criteria across different manufacturers.

Parameter Comparison

Engineering Selection Recommendations

2-2176091-9 (TE Connectivity Passive Product): This substitute provides identical resistance and tolerance specifications with increased power rating (0.25W vs. 0.125W). The higher power dissipation capability offers design margin in applications where thermal stress may be a consideration. Temperature coefficient is improved at ±25ppm/°C. ROHS3 compliance and MSL 1 rating match the primary part. Selection is appropriate for applications requiring enhanced thermal performance within the same package footprint.

ERA-6AEB1130V (Panasonic Electronic Components): This substitute matches the primary part in resistance, tolerance, power rating, and package specifications. The component carries AEC-Q200 automotive qualification, indicating compliance with automotive reliability standards. Temperature coefficient is ±25ppm/°C. ROHS3 compliance and MSL 1 rating are maintained. Selection is appropriate for applications requiring automotive-grade component reliability or where AEC-Q200 certification is specified.

Frequently Asked Questions (FAQ)

Q: Can 2-2176091-9 be used as a direct replacement for RT0805BRE07113RL?

A: Yes. Both components share identical resistance (113 Ohms), tolerance (±0.1%), package (0805), and composition (thin film). The higher power rating (0.25W vs. 0.125W) in the TE Connectivity part does not prevent substitution and provides additional thermal margin.

Q: What is the significance of the AEC-Q200 rating on ERA-6AEB1130V?

A: AEC-Q200 is an automotive industry qualification standard. The ERA-6AEB1130V meets automotive reliability requirements. This rating is relevant only if your application specifies automotive-grade components or operates in automotive environments.

Q: Are there dimensional differences between these three parts?

A: All three components use the 0805 (2012 Metric) package with identical length and width (0.079" L x 0.049" W / 2.00mm x 1.25mm). Height variation is minimal (0.024" to 0.026" seated maximum), which does not affect PCB layout or assembly compatibility.

Q: Does the temperature coefficient difference affect substitution?

A: The primary part has ±50ppm/°C while both substitutes have ±25ppm/°C. Lower temperature coefficient indicates better stability across temperature variations. This difference does not prevent substitution and represents an improvement in thermal performance.

Q: Are all three parts ROHS3 compliant?

A: Yes. RT0805BRE07113RL, 2-2176091-9, and ERA-6AEB1130V are all ROHS3 compliant with MSL 1 (unlimited moisture sensitivity level), meeting environmental and regulatory requirements.