RT0603FRE0795R3L Equivalent & Substitute Parts

Part Overview

The RT0603FRE0795R3L is a 95.3 Ohm ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and widely used in general-purpose electronic applications requiring precision resistive elements. Finding equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and optimize cost-performance trade-offs across different sourcing scenarios.

Substiute Parts

RT0603FRE0795R3L

YAGEOIn Stock: 888RT0603FRE0795R3L Datasheet

Current PartRFQ

ERA-3AEB95R3V

Panasonic Electronic ComponentsIn Stock: 11360ERA-3AEB95R3V Datasheet

UpgradeRFQ

RP73PF1J95R3BTDF

TE Connectivity Passive ProductIn Stock: 2047RP73PF1J95R3BTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0603FRE0795R3L is determined by the following critical parameters:

• Resistance Value: Must be 95.3 Ohms (exact match)
• Package / Case: Must be 0603 (1608 Metric) for PCB footprint compatibility
• Composition: Thin film construction ensures consistent performance characteristics
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• RoHS Compliance: ROHS3 Compliant status required for regulatory alignment

The identified substitute parts meet these core requirements. Tolerance and power rating variations are permitted within the constraints of the application's electrical design specifications, as these parameters define performance envelopes rather than absolute compatibility boundaries.

Parameter Comparison

Engineering Selection Recommendations

ERA-3AEB95R3V (Panasonic Electronic Components)

This substitute offers improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical power rating and package specifications. The part carries AEC-Q200 automotive qualification, indicating enhanced reliability screening and process controls. Selection is appropriate for applications requiring tighter resistance tolerances or automotive-grade component standards.

RP73PF1J95R3BTDF (TE Connectivity Passive Product)

This substitute provides higher power dissipation capability (0.167W versus 0.1W) and improved tolerance (±0.1%) with matching temperature coefficient performance (±25ppm/°C). The increased power rating accommodates designs with higher thermal margins. Physical dimensions show minor variation (0.061" L versus 0.063" L), which remains within standard 0603 package specifications. Selection is appropriate for applications requiring enhanced power handling or tighter tolerance specifications.

Frequently Asked Questions (FAQ)

Q: Can ERA-3AEB95R3V be used as a direct replacement for RT0603FRE0795R3L?

A: Yes. Both parts share identical resistance value (95.3 Ohms), package (0603), composition (thin film), and operating temperature range (-55°C ~ 155°C). The ERA-3AEB95R3V offers superior tolerance (±0.1% versus ±1%) and lower temperature coefficient, making it functionally compatible and performance-enhanced for the same application space.

Q: What is the difference between the power ratings of these parts?

A: The RT0603FRE0795R3L and ERA-3AEB95R3V are both rated at 0.1W (1/10W), while the RP73PF1J95R3BTDF is rated at 0.167W (1/6W). Higher power rating indicates greater thermal dissipation capability. Selection depends on circuit current requirements; if the design operates within 0.1W limits, all three parts are suitable. If higher power dissipation is anticipated, the RP73PF1J95R3BTDF provides additional margin.

Q: Are there physical compatibility concerns with the TE Connectivity part?

A: The RP73PF1J95R3BTDF has a slightly shorter length (0.061" versus 0.063") compared to the main part, but both conform to 0603 (1608 Metric) package standards. Height and width specifications are identical. PCB footprints designed for standard 0603 packages accommodate this part without modification.

Q: Which substitute is recommended for automotive applications?

A: The ERA-3AEB95R3V carries AEC-Q200 automotive qualification, indicating compliance with automotive reliability and environmental testing standards. This part is the appropriate selection for automotive-grade designs or applications requiring automotive component certification.

Q: How do tolerance differences affect circuit performance?

A: The main part (RT0603FRE0795R3L) has ±1% tolerance, while both substitutes offer ±0.1% tolerance. Tighter tolerance reduces resistance variation across production batches, improving circuit predictability and reducing design margin requirements. Selection depends on circuit sensitivity to resistance variation; precision analog circuits benefit from tighter tolerance specifications.