RT0603FRE07953RL Equivalent & Substitute Parts

Part Overview

The RT0603FRE07953RL is a 953 Ohms ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package form factor, and compatible electrical specifications within the 0603 SMD resistor category.

Key Parameters

Parameter	Value
Resistance	953 Ohms
Tolerance	±1%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thin Film
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the RT0603FRE07953RL is determined by the following criteria:

Resistance Value: Must be 953 Ohms
Package Form Factor: Must be 0603 (1608 Metric) with compatible footprint dimensions
Composition: Thin film construction required
Operating Temperature Range: Must support -55°C ~ 155°C minimum
Compliance: ROHS3 compliance required
Moisture Sensitivity: MSL 1 (Unlimited) acceptable

Tolerance, temperature coefficient, and power rating variations are permitted within the substitute group, as these parameters represent performance enhancements or alternative specifications suitable for equivalent circuit functionality.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power Rating	Temp Coeff	Operating Temp	Package	RoHS Status
RT0603FRE07953RL	YAGEO	953 Ω	±1%	0.1W	±50ppm/°C	-55°C ~ 155°C	0603	ROHS3
RT0603BRD07953RL	YAGEO	953 Ω	±0.1%	0.1W	±25ppm/°C	-55°C ~ 155°C	0603	ROHS3
RT0603DRE07953RL	YAGEO	953 Ω	±0.5%	0.1W	±50ppm/°C	-55°C ~ 155°C	0603	ROHS3
ERA-3AEB9530V	Panasonic Electronic Components	953 Ω	±0.1%	0.1W	±25ppm/°C	-55°C ~ 155°C	0603	ROHS3
RP73PF1J953RBTDF	TE Connectivity Passive Product	953 Ω	±0.1%	0.167W	±25ppm/°C	-55°C ~ 155°C	0603	ROHS3

Engineering Selection Recommendations

All listed substitute parts maintain active product status and ROHS3 compliance. Selection among substitutes depends on application-specific requirements:

RT0603BRD07953RL and RT0603DRE07953RL are YAGEO series alternatives offering tighter tolerance (±0.1% and ±0.5% respectively) while maintaining identical package and power specifications. Both are suitable for direct replacement in existing YAGEO-qualified designs.

ERA-3AEB9530V (Panasonic) provides ±0.1% tolerance with AEC-Q200 automotive qualification. This part is appropriate for applications requiring automotive-grade reliability and traceability.

RP73PF1J953RBTDF (TE Connectivity) offers ±0.1% tolerance with elevated power rating (0.167W vs. 0.1W). This part accommodates higher dissipation requirements while maintaining the 0603 package footprint.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07953RL replace RT0603FRE07953RL in any application?

A: Yes. Both parts share identical resistance, package, power rating, and operating temperature range. The RT0603BRD07953RL provides superior tolerance (±0.1% vs. ±1%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C), making it a direct upgrade.

Q: What is the difference between RT0603DRE07953RL and RT0603BRD07953RL?

A: Both are YAGEO 0603 953 Ohm resistors with 0.1W power rating. RT0603DRE07953RL has ±0.5% tolerance and ±50ppm/°C temperature coefficient, while RT0603BRD07953RL has ±0.1% tolerance and ±25ppm/°C temperature coefficient. Selection depends on tolerance and stability requirements.

Q: Is ERA-3AEB9530V suitable for non-automotive applications?

A: Yes. ERA-3AEB9530V meets all electrical and mechanical requirements for general-purpose 0603 953 Ohm applications. AEC-Q200 qualification indicates enhanced reliability and is not restricted to automotive use.

Q: Why does RP73PF1J953RBTDF have a higher power rating?

A: RP73PF1J953RBTDF is rated at 0.167W (1/6W) compared to 0.1W (1/10W) for other substitutes. This higher power dissipation capability accommodates applications with greater thermal demands while maintaining the same 0603 footprint and 953 Ohm resistance.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging, suitable for automated assembly processes.

Q: Can I use RP73PF1J953RBTDF in place of RT0603FRE07953RL if my circuit only requires 0.1W dissipation?

A: Yes. RP73PF1J953RBTDF is rated for 0.167W, which exceeds the 0.1W requirement. The higher power rating does not create compatibility issues in circuits requiring lower dissipation. All other electrical parameters remain compatible.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message