RT0603FRE07374RL Equivalent & Substitute Parts

Part Overview

The RT0603FRE07374RL is a 374 Ohms ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package form factor, and compatible electrical specifications within the 0603 SMD resistor category.

Substiute Parts

RT0603FRE07374RL

YAGEOIn Stock: 1071RT0603FRE07374RL Datasheet

Current PartRFQ

RT0603BRD07374RL

YAGEOIn Stock: 1226RT0603BRD07374RL Datasheet

UpgradeRFQ

ERA-3AEB3740V

Panasonic Electronic ComponentsIn Stock: 10550ERA-3AEB3740V Datasheet

UpgradeRFQ

ERA-3AED3740V

Panasonic Electronic ComponentsIn Stock: 20754ERA-3AED3740V Datasheet

UpgradeRFQ

RP73PF1J374RBTDF

TE Connectivity Passive ProductIn Stock: 3657RP73PF1J374RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0603FRE07374RL are qualified based on the following criteria:

• Resistance Value: All substitutes maintain 374 Ohms nominal resistance
• Package Compatibility: All substitutes use 0603 (1608 Metric) package with identical footprint dimensions (0.063" L x 0.031" W / 1.60mm x 0.80mm)
• Composition: All substitutes are thin film resistors
• Operating Temperature Range: All substitutes support -55°C ~ 155°C operating range
• Compliance: All substitutes are ROHS3 compliant with MSL 1 rating
• Tolerance and Power Rating Variations: Substitutes may offer improved tolerance (±0.1% or ±0.5%) or higher power ratings (0.167W) while maintaining functional equivalence

Parameter Comparison

Engineering Selection Recommendations

RT0603BRD07374RL (YAGEO): Direct upgrade within the same manufacturer series. Offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating and package specifications. Suitable for applications requiring tighter resistance tolerance.

ERA-3AEB3740V (Panasonic): Equivalent substitute with AEC-Q200 automotive qualification. Provides ±0.1% tolerance and ±25ppm/°C temperature coefficient. Recommended for automotive or mission-critical applications requiring automotive-grade component certification.

ERA-3AED3740V (Panasonic): Equivalent substitute with AEC-Q200 automotive qualification. Offers ±0.5% tolerance with ±25ppm/°C temperature coefficient. Suitable for automotive applications where tolerance requirements are less stringent than ±0.1%.

RP73PF1J374RBTDF (TE Connectivity): Equivalent substitute with higher power rating (0.167W vs 0.1W). Provides ±0.1% tolerance and ±25ppm/°C temperature coefficient. Applicable in applications requiring increased power dissipation capability within the same package footprint.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07374RL replace RT0603FRE07374RL in any application? A: Yes. RT0603BRD07374RL is functionally equivalent with improved specifications (tighter tolerance and lower temperature coefficient). It maintains the same 0603 package, power rating, and operating temperature range.

Q: What is the difference between ERA-3AEB3740V and ERA-3AED3740V? A: Both are Panasonic AEC-Q200 automotive-qualified substitutes. The primary difference is tolerance: ERA-3AEB3740V offers ±0.1% tolerance while ERA-3AED3740V offers ±0.5% tolerance. Both share identical temperature coefficient (±25ppm/°C) and power rating (0.1W).

Q: Can RP73PF1J374RBTDF be used as a direct replacement? A: Yes. RP73PF1J374RBTDF is a direct substitute with identical 0603 package and footprint. The higher power rating (0.167W vs 0.1W) provides additional thermal margin and does not create compatibility issues in standard applications.

Q: Are all substitutes ROHS3 compliant? A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the original RT0603FRE07374RL specifications.

Q: Which substitute should be selected for automotive applications? A: ERA-3AEB3740V or ERA-3AED3740V are recommended for automotive applications due to AEC-Q200 qualification. Selection between these two depends on tolerance requirements: ±0.1% (ERA-3AEB3740V) or ±0.5% (ERA-3AED3740V).