RT0603FRE07365RL Equivalent & Substitute Parts

Part Overview

The RT0603FRE07365RL is a 365 Ohm ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO and currently in active production status, this component is widely used in precision analog circuits and signal conditioning applications. Substitute parts are identified based on matching resistance value, package form factor, and compatible electrical specifications to ensure direct circuit board compatibility.

Substiute Parts

RT0603FRE07365RL

YAGEOIn Stock: 646RT0603FRE07365RL Datasheet

Current PartRFQ

RT0603BRD07365RL

YAGEOIn Stock: 3608RT0603BRD07365RL Datasheet

UpgradeRFQ

ERA-3AEB3650V

Panasonic Electronic ComponentsIn Stock: 4207ERA-3AEB3650V Datasheet

UpgradeRFQ

RP73PF1J365RBTDF

TE Connectivity Passive ProductIn Stock: 1285RP73PF1J365RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0603FRE07365RL are qualified based on the following criteria:

• Resistance Value: All substitutes maintain 365 Ohms nominal resistance
• Package Compatibility: All substitutes use 0603 (1608 Metric) package with identical footprint dimensions (0.063" L x 0.031" W / 1.60mm x 0.80mm)
• Composition: All substitutes are thin film resistors, ensuring similar frequency response and noise characteristics
• Operating Temperature: All substitutes support -55°C ~ 155°C range
• Environmental Compliance: All substitutes are ROHS3 compliant with MSL 1 rating
• Tolerance and Temperature Coefficient: Substitutes may offer improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), representing performance upgrades

Parameter Comparison

Engineering Selection Recommendations

Direct Substitution (Same Tolerance): The RT0603FRE07365RL can be directly replaced with RT0603BRD07365RL when improved tolerance and temperature stability are acceptable. Both are YAGEO products in active production with identical package and power specifications.

Automotive Applications: For circuits requiring automotive-grade components, ERA-3AEB3650V from Panasonic meets AEC-Q200 qualification while maintaining 0603 package compatibility and ±0.1% tolerance. This part is suitable for automotive and high-reliability applications.

Higher Power Dissipation Requirements: RP73PF1J365RBTDF from TE Connectivity provides 0.167W (1/6W) power rating in the same 0603 package, accommodating applications requiring increased thermal headroom. This part maintains ±0.1% tolerance and ±25ppm/°C temperature coefficient.

Compliance Verification: All substitute parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard PCB assembly processes and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07365RL be used as a direct replacement for RT0603FRE07365RL? A: Yes. Both parts share identical 365 Ohm resistance, 0603 package, 0.1W power rating, and operating temperature range. RT0603BRD07365RL offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it a performance upgrade.

Q: What is the difference between ERA-3AEB3650V and the YAGEO alternatives? A: ERA-3AEB3650V is manufactured by Panasonic and carries AEC-Q200 automotive qualification. It maintains the same 365 Ohm resistance, 0603 package, and 0.1W power rating, but is specifically qualified for automotive applications requiring higher reliability standards.

Q: When should RP73PF1J365RBTDF be selected over other substitutes? A: RP73PF1J365RBTDF should be selected when the circuit requires higher power dissipation capability. Its 0.167W (1/6W) rating provides 67% more power handling than the standard 0.1W alternatives, while maintaining 0603 package compatibility and ±0.1% tolerance.

Q: Are all substitute parts available in the same packaging format? A: Yes. All substitute parts are supplied in Tape & Reel (TR) packaging, matching the original RT0603FRE07365RL format for automated assembly compatibility.

Q: Do substitute parts require any PCB layout modifications? A: No. All substitute parts use identical 0603 (1608 Metric) package dimensions and footprint. No PCB redesign or layout changes are necessary for substitution.

Q: What is the significance of the ±50ppm/°C vs ±25ppm/°C temperature coefficient difference? A: Lower temperature coefficient indicates better resistance stability across temperature variations. The ±25ppm/°C specification of substitute parts provides superior performance in temperature-sensitive applications, reducing drift-related errors by 50% compared to the ±50ppm/°C original specification.