RT0603FRE07357RL Equivalent & Substitute Parts

Part Overview

The RT0603FRE07357RL is a 357 Ohms ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package dimensions, and compatible electrical specifications to ensure direct functional replacement in circuit applications.

Substiute Parts

RT0603FRE07357RL

YAGEOIn Stock: 824RT0603FRE07357RL Datasheet

Current PartRFQ

RT0603BRD07357RL

YAGEOIn Stock: 4607RT0603BRD07357RL Datasheet

UpgradeRFQ

ERA-3AEB3570V

Panasonic Electronic ComponentsIn Stock: 10743ERA-3AEB3570V Datasheet

UpgradeRFQ

RP73PF1J357RBTDF

TE Connectivity Passive ProductIn Stock: 1192RP73PF1J357RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0603FRE07357RL are qualified based on the following criteria:

• Resistance Value: All substitutes maintain 357 Ohms nominal resistance
• Package Compatibility: All substitutes use 0603 (1608 Metric) package with identical footprint dimensions (0.063" L x 0.031" W / 1.60mm x 0.80mm)
• Composition: All substitutes are thin film resistors
• Operating Temperature Range: All substitutes support -55°C ~ 155°C operating range
• Termination Count: All substitutes have 2 terminations
• RoHS Compliance: All substitutes maintain ROHS3 compliance
• Moisture Sensitivity: All substitutes rated MSL 1 (Unlimited)

Tolerance and temperature coefficient variations are permitted within the allowed electrical parameter ranges for this product category. Power rating may be equal or higher than the main part specification.

Parameter Comparison

Engineering Selection Recommendations

RT0603BRD07357RL (YAGEO): Direct upgrade from the main part with improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C). Maintains identical power rating and package specifications. Suitable for applications requiring tighter tolerance control.

ERA-3AEB3570V (Panasonic Electronic Components): Automotive-grade substitute rated to AEC-Q200 standard. Provides ±0.1% tolerance and ±25ppm/°C temperature coefficient. Recommended for automotive and high-reliability applications where AEC-Q200 qualification is required.

RP73PF1J357RBTDF (TE Connectivity Passive Product): Higher power rating (0.167W vs 0.1W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Suitable for applications requiring increased power dissipation capability within the same package footprint.

All substitute parts maintain active product status and full compliance with RoHS3 and MSL 1 requirements.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07357RL replace RT0603FRE07357RL directly?

A: Yes. Both parts share identical resistance value (357 Ohms), package (0603), power rating (0.1W), and operating temperature range (-55°C ~ 155°C). RT0603BRD07357RL offers improved tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C).

Q: What is the difference between the main part and substitute parts in terms of tolerance?

A: The main part RT0603FRE07357RL has ±1% tolerance. All three substitute parts have ±0.1% tolerance, providing tighter resistance accuracy for precision circuit applications.

Q: Is ERA-3AEB3570V suitable for non-automotive applications?

A: Yes. ERA-3AEB3570V is automotive-qualified (AEC-Q200) but can be used in general industrial and commercial applications. The AEC-Q200 qualification indicates higher reliability standards and does not restrict use in non-automotive circuits.

Q: Does RP73PF1J357RBTDF have a different footprint than the main part?

A: No. RP73PF1J357RBTDF uses the same 0603 (1608 Metric) package with compatible footprint dimensions. The higher power rating (0.167W vs 0.1W) does not affect PCB layout or mounting compatibility.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant and rated MSL 1 (Unlimited moisture sensitivity level), matching the environmental compliance of the main part.

Q: Which substitute part should be selected for high-precision applications?

A: All three substitute parts offer ±0.1% tolerance compared to the main part's ±1%. Selection between RT0603BRD07357RL, ERA-3AEB3570V, and RP73PF1J357RBTDF depends on application-specific requirements: standard industrial (RT0603BRD07357RL), automotive (ERA-3AEB3570V), or higher power dissipation (RP73PF1J357RBTDF).