RT0603FRE072K87L Equivalent & Substitute Parts

Part Overview

The RT0603FRE072K87L is a 2.87 kOhms ±1% thin film chip resistor in 0603 (1608 Metric) package manufactured by YAGEO. This component is actively produced and widely used in precision analog circuits, signal conditioning, and measurement applications where stable resistance values are required. Substitute parts are identified based on matching resistance value, package dimensions, and electrical performance within acceptable tolerance and temperature coefficient ranges.

Substiute Parts

RT0603FRE072K87L

YAGEOIn Stock: 894RT0603FRE072K87L Datasheet

Current PartRFQ

RT0603BRD072K87L

YAGEOIn Stock: 10277RT0603BRD072K87L Datasheet

UpgradeRFQ

RT0603BRE072K87L

YAGEOIn Stock: 4776RT0603BRE072K87L Datasheet

UpgradeRFQ

RT0603DRD072K87L

YAGEOIn Stock: 16315RT0603DRD072K87L Datasheet

UpgradeRFQ

5-2176088-0

TE Connectivity Passive ProductIn Stock: 13455-2176088-0 Datasheet

DirectRFQ

ERA-3AEB2871V

Panasonic Electronic ComponentsIn Stock: 8429ERA-3AEB2871V Datasheet

UpgradeRFQ

RG1608P-2871-B-T5

SusumuIn Stock: 94025RG1608P-2871-B-T5 Datasheet

UpgradeRFQ

RG1608P-2871-D-T5

SusumuIn Stock: 5919RG1608P-2871-D-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0603FRE072K87L are qualified based on the following criteria:

Mandatory Matching Parameters:

• Resistance value: 2.87 kOhms (exact match)
• Package / Case: 0603 (1608 Metric)
• Composition: Thin Film
• Operating temperature range: -55°C ~ 155°C minimum
• RoHS3 compliance

Allowable Variation Parameters:

• Tolerance: ±1% or tighter (±0.5%, ±0.1%)
• Power rating: 0.1W or higher (0.167W acceptable)
• Temperature coefficient: ±50ppm/°C or better (±25ppm/°C acceptable)

Parts are grouped into two categories:

Upgrade Substitutes – Parts with improved electrical specifications (tighter tolerance, lower temperature coefficient) that maintain full backward compatibility.

Direct Substitutes – Parts from alternative manufacturers with equivalent or superior specifications.

Parameter Comparison

Engineering Selection Recommendations

For Standard Industrial Applications: RT0603BRE072K87L or RT0603BRD072K87L provide tighter tolerance (±0.1%) while maintaining the same package and power rating. Both are YAGEO products with active production status and full RoHS3 compliance.

For Precision Analog Circuits: RT0603BRD072K87L offers the best combination of ±0.1% tolerance and ±25ppm/°C temperature coefficient, ensuring minimal drift across the operating temperature range.

For Automotive or High-Reliability Applications: ERA-3AEB2871V (Panasonic) or RG1608P-2871-B-T5 (Susumu) are AEC-Q200 qualified, meeting automotive industry reliability standards. RG1608P-2871-B-T5 includes anti-sulfur coating for enhanced environmental resistance.

For Higher Power Dissipation: 5-2176088-0 (TE Connectivity) provides 0.167W power rating with ±0.1% tolerance and ±25ppm/°C temperature coefficient, suitable for applications requiring additional thermal margin.

For Cost-Optimized Designs: RT0603DRD072K87L maintains ±0.5% tolerance with improved ±25ppm/°C temperature coefficient at lower cost than ±0.1% alternatives.

All substitute parts maintain ROHS3 compliance, MSL Level 1 (unlimited moisture sensitivity), and -55°C ~ 155°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD072K87L directly replace RT0603FRE072K87L? A: Yes. RT0603BRD072K87L is a direct upgrade with identical package, power rating, and operating temperature range. The ±0.1% tolerance is tighter than the original ±1%, and the ±25ppm/°C temperature coefficient is superior to ±50ppm/°C. No circuit redesign is required.

Q: What is the difference between RT0603BRD072K87L and RT0603BRE072K87L? A: Both have ±0.1% tolerance. RT0603BRD072K87L has ±25ppm/°C temperature coefficient, while RT0603BRE072K87L has ±50ppm/°C. Choose RT0603BRD072K87L for applications requiring minimal temperature drift.

Q: Can I use RG1608P-2871-B-T5 in non-automotive applications? A: Yes. RG1608P-2871-B-T5 exceeds standard industrial requirements with AEC-Q200 qualification and anti-sulfur coating. It is fully compatible with the 0603 package and provides ±0.1% tolerance with ±25ppm/°C temperature coefficient.

Q: Why is 5-2176088-0 rated at 0.167W instead of 0.1W? A: 5-2176088-0 is a 1/6W resistor versus the standard 1/10W rating. The higher power rating provides additional thermal margin in the same 0603 package. It is electrically compatible and can be used as a direct substitute with improved reliability in power-dissipative applications.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant with MSL Level 1 (unlimited moisture sensitivity), matching the original RT0603FRE072K87L specifications.

Q: What does AEC-Q200 qualification mean? A: AEC-Q200 is an automotive industry standard for passive components. Parts meeting this qualification (ERA-3AEB2871V, RG1608P-2871-B-T5, RG1608P-2871-D-T5) have undergone rigorous reliability testing and are suitable for automotive and high-reliability applications.

Q: Can I mix different substitute parts in the same circuit? A: Yes, provided the circuit design accommodates the tolerance and temperature coefficient variations. For precision applications, use parts with matching tolerance and temperature coefficient specifications to ensure consistent performance across the circuit.