RT0603FRE072K15L Equivalent & Substitute Parts

Part Overview

The RT0603FRE072K15L is a 2.15 kOhms ±1% thin film chip resistor in 0603 (1608 Metric) package manufactured by YAGEO. This component is actively produced and widely used in precision analog circuits, signal conditioning, and measurement applications where moderate tolerance and stable temperature performance are required. Equivalent and substitute parts are identified based on matching resistance value, package dimensions, and electrical performance within acceptable parameter ranges for this product category.

Substiute Parts

RT0603FRE072K15L

YAGEOIn Stock: 1231RT0603FRE072K15L Datasheet

Current PartRFQ

RT0603BRD072K15L

YAGEOIn Stock: 19996RT0603BRD072K15L Datasheet

UpgradeRFQ

RT0603DRD072K15L

YAGEOIn Stock: 11251RT0603DRD072K15L Datasheet

UpgradeRFQ

4-2176088-1

TE Connectivity Passive ProductIn Stock: 28774-2176088-1 Datasheet

DirectRFQ

ERA-3AEB2151V

Panasonic Electronic ComponentsIn Stock: 44038ERA-3AEB2151V Datasheet

UpgradeRFQ

RG1608P-2151-B-T5

SusumuIn Stock: 64483RG1608P-2151-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Matching Parameters:

• Resistance value: 2.15 kOhms (exact match required)
• Package / Case: 0603 (1608 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)

Secondary Allowable Variations:

• Tolerance: ±1% or tighter (±0.5%, ±0.1%)
• Power Rating: 0.1W or higher (0.167W acceptable)
• Temperature Coefficient: ±50ppm/°C or better (±25ppm/°C acceptable)
• Packaging Format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel®

All identified substitutes meet or exceed the primary matching parameters and maintain compatibility with the original design specifications.

Parameter Comparison

Engineering Selection Recommendations

YAGEO RT0603BRD072K15L — Upgrade option with tighter tolerance (±0.1%) and improved temperature coefficient (±25ppm/°C). Maintains identical power rating and package. Available in Cut Tape format for lower-volume applications.

YAGEO RT0603DRD072K15L — Upgrade option with ±0.5% tolerance and ±25ppm/°C temperature coefficient. Maintains original packaging format (Tape & Reel). Suitable for applications requiring better stability than ±1%.

TE Connectivity 4-2176088-1 — Direct substitute with higher power rating (0.167W) and ±0.1% tolerance. Dimensions vary slightly (0.061" L vs. 0.063" L). Suitable for designs with higher power dissipation requirements.

Panasonic ERA-3AEB2151V — Upgrade option with ±0.1% tolerance and Automotive AEC-Q200 certification. Recommended for automotive and high-reliability applications requiring formal qualification.

Susumu RG1608P-2151-B-T5 — Upgrade option with ±0.1% tolerance, Anti-Sulfur coating, and Automotive AEC-Q200 certification. Lowest seated height (0.020" vs. 0.022"). Recommended for automotive applications in corrosive environments.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD072K15L replace RT0603FRE072K15L directly?

A: Yes. Both parts share identical resistance, power rating, and package dimensions. RT0603BRD072K15L offers superior tolerance (±0.1% vs. ±1%) and better temperature stability (±25ppm/°C vs. ±50ppm/°C). The primary difference is packaging format (Cut Tape vs. Tape & Reel).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape for automated assembly. Cut Tape (CT) & Digi-Reel® is pre-cut tape on a reel for lower-volume or manual assembly. Both formats contain identical components; packaging format selection depends on assembly equipment and order quantity.

Q: Is the TE Connectivity 4-2176088-1 compatible with the original design?

A: Yes, with one consideration. The TE part has a higher power rating (0.167W vs. 0.1W) and slightly different length (0.061" vs. 0.063"). These differences are within acceptable mechanical and electrical tolerances for 0603 package designs. Verify PCB footprint compatibility before use.

Q: When should I use the Panasonic ERA-3AEB2151V?

A: Use ERA-3AEB2151V when Automotive AEC-Q200 certification is required. This part meets automotive qualification standards and is suitable for automotive, industrial, and high-reliability applications.

Q: What advantage does the Susumu RG1608P-2151-B-T5 provide?

A: The Susumu part combines ±0.1% tolerance, Anti-Sulfur coating, and Automotive AEC-Q200 certification. The Anti-Sulfur feature provides enhanced corrosion resistance in harsh environments. The lowest seated height (0.020") may be beneficial for space-constrained designs.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitutes are ROHS3 compliant and maintain Moisture Sensitivity Level 1 (Unlimited), matching the original part's environmental compliance.