RT0603FRE07267RL Equivalent & Substitute Parts

Part Overview

The RT0603FRE07267RL is a 267 Ohms ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package form factor, and compatible electrical specifications within the 0603 SMD resistor category.

Substiute Parts

RT0603FRE07267RL

YAGEOIn Stock: 1182RT0603FRE07267RL Datasheet

Current PartRFQ

RT0603BRD07267RL

YAGEOIn Stock: 2625RT0603BRD07267RL Datasheet

UpgradeRFQ

RT0603DRD07267RL

YAGEOIn Stock: 11999RT0603DRD07267RL Datasheet

UpgradeRFQ

ERA-3AEB2670V

Panasonic Electronic ComponentsIn Stock: 5580ERA-3AEB2670V Datasheet

UpgradeRFQ

RP73PF1J267RBTDF

TE Connectivity Passive ProductIn Stock: 3283RP73PF1J267RBTDF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0603FRE07267RL is determined by the following criteria:

• Resistance Value: Must be 267 Ohms
• Package Form Factor: Must be 0603 (1608 Metric) to ensure PCB footprint compatibility
• Composition: Thin film construction maintains electrical performance characteristics
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• Tolerance: Acceptable range ±0.1% to ±1% (tighter tolerances are acceptable upgrades)
• Power Rating: Minimum 0.1W; higher ratings are acceptable
• Compliance: ROHS3 compliance preferred; RoHS non-compliant parts noted where applicable

Four substitute parts meet these criteria with varying tolerance and power specifications.

Parameter Comparison

Engineering Selection Recommendations

YAGEO RT0603BRD07267RL: Direct upgrade within the same manufacturer series. Offers improved tolerance (±0.1% vs ±1%) and reduced temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating and package. ROHS3 compliant. Recommended for applications requiring tighter tolerance specifications.

YAGEO RT0603DRD07267RL: Mid-range tolerance option (±0.5%) with improved temperature coefficient (±25ppm/°C). Maintains ROHS3 compliance and identical package/power specifications. Suitable for applications where tolerance requirements fall between ±1% and ±0.1%.

Panasonic ERA-3AEB2670V: Automotive-grade substitute with AEC-Q200 qualification. Provides ±0.1% tolerance and ±25ppm/°C temperature coefficient. ROHS3 compliant. Appropriate for automotive and high-reliability applications requiring automotive-grade components.

TE Connectivity RP73PF1J267RBTDF: Offers highest power rating (0.167W vs 0.1W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. RoHS non-compliant status requires evaluation against application requirements. Suitable for applications requiring higher power dissipation capability.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07267RL replace RT0603FRE07267RL directly?

A: Yes. Both components share identical 267 Ohms resistance, 0.1W power rating, 0603 package, and -55°C ~ 155°C operating range. RT0603BRD07267RL provides superior tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C), making it a direct upgrade.

Q: What is the difference between RT0603DRD07267RL and RT0603BRD07267RL?

A: Both are YAGEO thin film resistors with identical package and power rating. RT0603BRD07267RL offers tighter tolerance (±0.1% vs ±0.5%). Selection depends on circuit tolerance requirements.

Q: Is ERA-3AEB2670V suitable for non-automotive applications?

A: Yes. ERA-3AEB2670V meets all electrical and mechanical requirements for standard applications. AEC-Q200 qualification indicates automotive-grade reliability but does not restrict use in other applications.

Q: Why is RP73PF1J267RBTDF marked RoHS non-compliant?

A: RP73PF1J267RBTDF does not meet ROHS3 compliance requirements. Selection requires confirmation that the application or end-use market permits RoHS non-compliant components.

Q: Can I use RP73PF1J267RBTDF in place of RT0603FRE07267RL?

A: Electrical and mechanical compatibility exists (267 Ohms, 0603 package, -55°C ~ 155°C range). The higher power rating (0.167W) is acceptable. RoHS compliance status must be evaluated against application requirements before substitution.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging, maintaining supply chain compatibility with the original RT0603FRE07267RL.