RT0603FRE07215RL Equivalent & Substitute Parts

Part Overview

The RT0603FRE07215RL is a 215 Ohms ±1% thin film chip resistor in 0603 (1608 Metric) package rated at 0.1W (1/10W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package size, and compatible electrical specifications to ensure direct circuit board compatibility.

Substiute Parts

RT0603FRE07215RL
YAGEOIn Stock: 981RT0603FRE07215RL Datasheet
RT0603FRE07215RL
Current Part
RT0603BRD07215RL
YAGEOIn Stock: 3054RT0603BRD07215RL Datasheet
RT0603BRD07215RL
Upgrade
ERA-3AEB2150V
Panasonic Electronic ComponentsIn Stock: 19385ERA-3AEB2150V Datasheet
ERA-3AEB2150V
Upgrade
RG1608P-2150-B-T5
SusumuIn Stock: 6092RG1608P-2150-B-T5 Datasheet
RG1608P-2150-B-T5
Upgrade
RP73PF1J215RBTDF
TE Connectivity Passive ProductIn Stock: 1051RP73PF1J215RBTDF Datasheet
RP73PF1J215RBTDF
Upgrade

Key Parameters

Parameter Value
Resistance 215 Ohms
Tolerance ±1%
Power Rating 0.1W (1/10W)
Package / Case 0603 (1608 Metric)
Composition Thin Film
Operating Temperature Range -55°C ~ 155°C
Temperature Coefficient ±50ppm/°C
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level 1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the RT0603FRE07215RL are qualified based on the following criteria:

  • Resistance value: 215 Ohms (exact match required)
  • Package / Case: 0603 (1608 Metric) (exact match required)
  • Power rating: Equal to or greater than 0.1W
  • Tolerance: Equal to or better than ±1%
  • Composition: Thin Film
  • Operating temperature range: -55°C ~ 155°C (minimum requirement)
  • RoHS compliance: ROHS3 Compliant

Parts meeting these parameters are electrically and mechanically interchangeable in standard applications. Tolerance improvements and enhanced temperature coefficients represent performance upgrades without compromising compatibility.

Parameter Comparison

Manufacturer Part Number Manufacturer Resistance Tolerance Power (Watts) Temperature Coefficient Package Operating Temperature RoHS Status
RT0603FRE07215RL YAGEO 215 Ohms ±1% 0.1W ±50ppm/°C 0603 -55°C ~ 155°C ROHS3
RT0603BRD07215RL YAGEO 215 Ohms ±0.1% 0.1W ±25ppm/°C 0603 -55°C ~ 155°C ROHS3
ERA-3AEB2150V Panasonic Electronic Components 215 Ohms ±0.1% 0.1W ±25ppm/°C 0603 -55°C ~ 155°C ROHS3
RG1608P-2150-B-T5 Susumu 215 Ohms ±0.1% 0.1W ±25ppm/°C 0603 -55°C ~ 155°C ROHS3
RP73PF1J215RBTDF TE Connectivity Passive Product 215 Ohms ±0.1% 0.167W ±25ppm/°C 0603 -55°C ~ 155°C ROHS3

Engineering Selection Recommendations

All listed substitute parts maintain ROHS3 compliance and operate within the -55°C ~ 155°C temperature range specified for the original component. Selection among substitutes depends on application-specific requirements:

RT0603BRD07215RL offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating and package specifications.

ERA-3AEB2150V provides the same electrical performance as RT0603BRD07215RL with additional AEC-Q200 automotive qualification, suitable for automotive-grade applications.

RG1608P-2150-B-T5 combines AEC-Q200 automotive qualification with anti-sulfur protection, maintaining ±0.1% tolerance and ±25ppm/°C temperature coefficient.

RP73PF1J215RBTDF delivers higher power dissipation (0.167W vs 0.1W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient, providing thermal margin in power-constrained designs.

Frequently Asked Questions (FAQ)

Q: Can RT0603BRD07215RL directly replace RT0603FRE07215RL?

A: Yes. Both components share identical resistance (215 Ohms), package (0603), power rating (0.1W), and operating temperature range (-55°C ~ 155°C). RT0603BRD07215RL offers improved tolerance and temperature coefficient specifications.

Q: What is the difference between standard and automotive-qualified substitutes?

A: ERA-3AEB2150V and RG1608P-2150-B-T5 carry AEC-Q200 automotive qualification. This certification indicates compliance with automotive reliability and environmental stress testing standards. Use automotive-qualified parts in automotive applications where AEC-Q200 compliance is required.

Q: Why does RP73PF1J215RBTDF have a higher power rating?

A: RP73PF1J215RBTDF is rated at 0.167W (1/6W) compared to 0.1W (1/10W) for the original part. This higher power dissipation capability provides additional thermal margin but does not affect electrical compatibility in circuits designed for 0.1W resistors.

Q: Are all substitutes available in Tape & Reel packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging, matching the original component's packaging format for automated assembly compatibility.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the component has unlimited shelf life under normal storage conditions without requiring special moisture control or baking procedures prior to soldering.

Request Quote (Ships tomorrow)